Page 1 of 3

SEVEN performance parts

Posted: Fri Oct 01, 2010 7:57 am
by martints1
Hi scooterists,
...I´m manufacturing some tuning parts for Lambrettas.....for further information or questions, please send an email to ts1_mg@hotmail.com !

Image
seven_RBmanifold_eng by martints1, on Flickr

Image
seven_TS1_VForce_manifold_eng by martints1, on Flickr

Image
seven_TS1_VForce_adapter_eng by martints1, on Flickr



I will update the parts-descriptions as soon as possible !

Regards Martin
SEVEN twostroke performance

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 9:41 am
by soulsurfer
I'd seen this stuff a while back, very nice. Do you do one offs for forum members? ;-)

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 11:45 am
by martints1
soulsurfer wrote:I'd seen this stuff a while back, very nice. Do you do one offs for forum members? ;-)
...thanks a lot....yes, I can do one offs...please tell me what you want...many things are possible :)

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 11:58 am
by rocho68
Hi martin , i will be looking to have a manifold designed for the kdx project in the current posts , it would basically the same as the rb manifold but maybe different fixing holes , let me know if your intrested and what costs are involved

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 12:02 pm
by soulsurfer
martints1 wrote:
soulsurfer wrote:I'd seen this stuff a while back, very nice. Do you do one offs for forum members? ;-)
...thanks a lot....yes, I can do one offs...please tell me what you want...many things are possible :)
Email sent ;)

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 12:05 pm
by martints1
rocho68 wrote:Hi martin , i will be looking to have a manifold designed for the kdx project in the current posts , it would basically the same as the rb manifold but maybe different fixing holes , let me know if your intrested and what costs are involved
Hi,
...please can sou send me an email with some datas of the barrel/fixings ? I´m interested to do.....cheers Martin

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 1:00 pm
by rocho68
martints1 wrote:
rocho68 wrote:Hi martin , i will be looking to have a manifold designed for the kdx project in the current posts , it would basically the same as the rb manifold but maybe different fixing holes , let me know if your intrested and what costs are involved
Hi,
...please can sou send me an email with some datas of the barrel/fixings ? I´m interested to do.....cheers Martin
thanks martin will do , in the mean time is there anywere we can see better pictures ?

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 1:07 pm
by martints1
...for better pictures - please send me en email to ts1_mg@hotmail.com !
Regards Martin

Re: SEVEN performance parts

Posted: Fri Oct 01, 2010 1:10 pm
by soulsurfer
rocho68 wrote:
martints1 wrote:
rocho68 wrote:Hi martin , i will be looking to have a manifold designed for the kdx project in the current posts , it would basically the same as the rb manifold but maybe different fixing holes , let me know if your intrested and what costs are involved
Hi,
...please can sou send me an email with some datas of the barrel/fixings ? I´m interested to do.....cheers Martin
thanks martin will do , in the mean time is there anywere we can see better pictures ?
http://www.scooter-center.com/scoweb/pa ... =seven%207

Re: SEVEN performance parts

Posted: Sat Oct 02, 2010 6:50 pm
by Bilko
Nice work.

Wouldn't mind a manifold for the RB250.