thought id make a start on the lambhunna
cant afford the idea i had for it originally, so its going to be a mattblack spray can job, some writing on it with a paint pen, snett seat,inline wheel carrier,sprint rack..... all body work is ok ish, no welding to do, just a bit of tin bashing.
all i need is Af vw billy no mates exhaust,12v kit,few engine bits when i strip it,do the forks,decent tyres and a bit of trim
the plan is to write all the English,Scottish,Welsh,Ni,Irish scooter clubs over the bodywork, daft i know,but wanted to do something different
£650 for the scooter and fingers crossed about £350 for the other bits
new project
-
- registered user
- Posts: 77
- Joined: Tue Feb 10, 2009 6:19 pm
- Contact:
-
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
£650 for the scooter and fingers crossed about £350 for the other bits
Think you may be a bit ambitious on that sum. I'm three quarters through with my Injun and over that sum already.
Think you may be a bit ambitious on that sum. I'm three quarters through with my Injun and over that sum already.
Compact Toolbox Flywheel Holder
Hi Geoff how the scoot going m8 only just spotted this post I have some bits you may need free to you m8 just let me know what you need and I ask at the club for you.