my new project, should be a quick build i hope :O)
-
Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Agree with Mike..its coming on nice casper, youre putting some work in with the fab matey..should look the dogs..are you leaving the digi flush or going inset? see you got mm on the headset..what colour you going for..?
Ricspeed, gone but never forgotten RIP my friend #59
very nice
-
caspa2006
- registered user
- Posts: 186
- Joined: Fri Sep 11, 2009 2:23 pm
- Location: Stourbridge, West Midalnds........ Modern World SC
- Contact:
cheers lads
about the digi speedo not sure yet still playing i might put in on the frame loop
just behide the filler thats my first choice and smooth it all in like a raised dash but
level with the filler and have a speed cam. gps detector thing were the speedo goes
as for color dark metlic red with candy and flip yellow,orange, green swirls things i have
seen it on a custom bike a few years ago and it looked plain simple neat and very nice
just sounds a mess
about the digi speedo not sure yet still playing i might put in on the frame loop
just behide the filler thats my first choice and smooth it all in like a raised dash but
level with the filler and have a speed cam. gps detector thing were the speedo goes
as for color dark metlic red with candy and flip yellow,orange, green swirls things i have
seen it on a custom bike a few years ago and it looked plain simple neat and very nice
just sounds a mess
Vespa made in Italy thrashed in Great Britain
like the rear light ,might be an idea to weld some 5mm rod to the edges though
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
caspa2006
- registered user
- Posts: 186
- Joined: Fri Sep 11, 2009 2:23 pm
- Location: Stourbridge, West Midalnds........ Modern World SC
- Contact:
not done much really I have been reading the post about the rb's running hot so I have just added air vents to the panels and just got them finished off and I am in the middle of getting
a sat nav frenched in to the frame loop
a sat nav frenched in to the frame loop
Vespa made in Italy thrashed in Great Britain
nice vents mate 
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
sydduckett
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
Nyle, got any tips on how you went about doing the your rear vents, I had previosly given your pics to the guy thats going to do them for me when you posted on here last. Any advice you could give on how you got such a good finish would be very helpful. For my money they are the best looking vents i have seen on a scoot......Not crawling you understand...Nyle wrote:Nice vents;)
They look like mine on my Lambretta
sef
-
caspa2006
- registered user
- Posts: 186
- Joined: Fri Sep 11, 2009 2:23 pm
- Location: Stourbridge, West Midalnds........ Modern World SC
- Contact:
sorry mate copied yours as they looked smart when completedand i have heard about the rb's running hot so this solved my problem
ps
sorry again for nicking your idear
Vespa made in Italy thrashed in Great Britain
-
sydduckett
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
Casp, dont think he will mind. If i had done somthing that other people then copied i would be very happy...caspa2006 wrote:
and i have heard about the rb's running hot so this solved my problem
ps
sorry again for nicking your idear
Imatation is after all the most sincere form of flattery....sef
Now tell me how you done yours very very slowly.....