NOS TS1

Post pics & videos of your scooter, projects you're working on, a lovely Vespa that you saw at a rally, or anything else scooter related.
shocky
registered user
Posts: 2139
Joined: Wed Jan 07, 2009 12:33 pm
Location: cheltenham
Contact:

Muppet wrote:does the scomadi use stock type dampers?
Do you mean the scooter or scamadi forks ? the scooter uses an outboard shock with a 12mm fixing pin top and bottom like this but these are of my own making ;)
Image
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
User avatar
gpts1
registered user
Posts: 155
Joined: Tue Dec 13, 2011 2:47 am
Contact:

Had a bit of time to get some more machining done, so it is now almost ready to fit into the forks and have a look how I'm going to set up the anti dive on it .
Image
Image
User avatar
gpts1
registered user
Posts: 155
Joined: Tue Dec 13, 2011 2:47 am
Contact:

Hi All, was pretty busy around the house over the Christmas new years break but managed to get the disk into the fork to see what it looks like.
Image
Image
User avatar
guygrrr
registered user
Posts: 119
Joined: Wed Jan 21, 2009 7:18 am
Main scooter: 1980 Vespa P187
Location: Philadelphia
Contact:

Very trick! It's nice to see it coming along.
----------------------
more can do, less doodoo.
rudeboy67
registered user
Posts: 2
Joined: Wed Aug 03, 2011 11:24 am
Main scooter: lambretta series 1 ,SX200
Contact:

Lovin the work in this keep it up cant wait to see final result !
User avatar
gpts1
registered user
Posts: 155
Joined: Tue Dec 13, 2011 2:47 am
Contact:

Got my TS1 back for my Buddy Kevin, hes an awesome engine builder and drag races his GP down here in New Zealand, his best time so far is 13.4 @98 mph
Image
Image
Next job on the list is to get the cylinder shroud modified to fit my center plug head.
Image
Image
User avatar
gpts1
registered user
Posts: 155
Joined: Tue Dec 13, 2011 2:47 am
Contact:

have managed to get a little done, but not as much as i would like,

Image

Image

Cylinder shroud was done, then i discovered fan was to far away from the fan cover, so Ive modified that to close up the gap and will be getting the shroud modified to suit.



stripped and detailed my PWK, plus modified it to fit my nitrous injector

Image

Image


Forks were stripped again and new stainless brackets welded in the right place this time

Image
Image
Image


Also added the anti dive bracket as well.

Image

Image



Discovered a small crack in one of the lower fork half's obviously from when they were formed, so that was fixed also.

Image


Forks are just about ready to put back together now after Ive finished remetal finishing them.
User avatar
gpts1
registered user
Posts: 155
Joined: Tue Dec 13, 2011 2:47 am
Contact:

forks are back together, and i done a bit more machining work on the disk brake
Image
Image
User avatar
gpts1
registered user
Posts: 155
Joined: Tue Dec 13, 2011 2:47 am
Contact:

Got all the body panels in primer over the weekend
Image
Image
User avatar
gpts1
registered user
Posts: 155
Joined: Tue Dec 13, 2011 2:47 am
Contact:

few photos to update you where im up to.
Image
Image
Image
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 13 guests