Page 1 of 3
old scooter
Posted: Fri Mar 14, 2014 10:29 pm
by wrecklessrobbie
I bought this 10 years ago. Done nothing with it. Was sprayed over and bits welded by someone in Spain during its life. Not sure what to do with it.
http://s273.photobucket.com/user/robbie ... sort=3&o=0
Re: old scooter
Posted: Fri Mar 14, 2014 10:32 pm
by rosscla
What are you thinking?
Looks quite solid, get it up and running and run as is?
Re: old scooter
Posted: Fri Mar 14, 2014 10:40 pm
by wrecklessrobbie
Its solid and mainly straight. Carb and speedo missing, otherwise all there.
Re: old scooter
Posted: Sat Mar 15, 2014 9:13 pm
by Toddy
Agree looks a great base for a project
Re: old scooter
Posted: Tue Mar 18, 2014 8:50 pm
by Scootissimo
Series 2 Street Racer - stick a set of drops on it and a kit the engine!
Wide boys look great with race paintwork too!
Re: old scooter
Posted: Sun Jul 06, 2014 7:51 pm
by wrecklessrobbie
Re: old scooter
Posted: Sat Sep 20, 2014 10:54 pm
by wrecklessrobbie
How do I add photos?
I'm a techno phobe.
Robbie
Re: old scooter
Posted: Sun Sep 21, 2014 9:58 am
by DaveTomo
Re: old scooter
Posted: Sun Sep 21, 2014 10:31 am
by wrecklessrobbie
I'm on a hudl tablet.
Am not sure how to do it.
I'm thick.
I have rebuilt my forks.....I have fitted a new lower bearing race/cup. The original was slightly pitted. The new race is loose on the shaft ( story of my life ). When the bearing goes on which I presume is steel frame down the race spins as well as the bearing.
The forks I have are Spanish.
Do I need another bearing race? Are they different sizes?
Re: old scooter
Posted: Sun Sep 21, 2014 10:32 am
by wrecklessrobbie
PS thank you Dave tomo.