Page 1 of 8
MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Mon Sep 23, 2013 9:49 pm
by MADSPEEDRB260
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Mon Sep 23, 2013 9:53 pm
by ducksta
keeper or seller when done
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Mon Sep 23, 2013 10:24 pm
by MADSPEEDRB260
I'm doing this one for my mate Andy sorry pal lol
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Tue Sep 24, 2013 9:58 pm
by MADSPEEDRB260
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Wed Sep 25, 2013 12:06 pm
by dapper
Never worked on a Series 2. What's that coil doing on the junction block?
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Wed Sep 25, 2013 12:12 pm
by DigDug
dapper wrote:Never worked on a Series 2. What's that coil doing on the junction block?
I've never had one with one of those....
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Wed Sep 25, 2013 7:33 pm
by Rotor
Bet you have a 2 -- 1 light switch as well (extra wire) good luck finding another if its faulty ! cost me £70 once I found one NOS, Looks like some one has shifted the coil up there and deleted the big green ressistor which would be fitted the other side? Prob has a Carrello head light too !
Paul
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Mon Sep 30, 2013 5:00 pm
by MADSPEEDRB260
Well im no train spotter and it doesn't look like its ever been apart. All new parts will be BGM so no use to us with this resistor. ill put the photos on tomorrow showing the forks. hub. And wide wheels. Ps yes it is a ...Carrello head light
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Wed Oct 02, 2013 12:05 pm
by MADSPEEDRB260
Right let's get started. 1st clean all the parts
Before.
And after....
Before.
And after.
Re: MADSPEED PERFORMANCE No33 S2 PROJECT
Posted: Wed Oct 02, 2013 12:09 pm
by MADSPEEDRB260