Search found 156 matches

by Lambretta Sash
Sun Apr 01, 2012 12:11 am
Forum: Lambretta Tech
Topic: Stud Extractor to get barrel stud out
Replies: 5
Views: 1820

Re: Stud Extractor to get barrel stud out

Try using the extended cowling nut threaded on barrel stud 3/4's of the way, then fit cowling m8 nut and tighten up........ Hopefully this may work.

Can also be used on 6mm studs if you can find extended 6mm nut

sash
by Lambretta Sash
Thu Jan 12, 2012 3:38 am
Forum: Lambretta Tech
Topic: shrinking pistons?
Replies: 44
Views: 10280

Re: shrinking pistons?

I'm intrigued, but ponder on the following

A misaligned con rod does not let the piston rings have proper contact with the cylinder wall allowing pistons to wear rapidly and unevenly ?

Or inlet port shape can cause rapid wear ?

Hope this helps
by Lambretta Sash
Mon Jan 09, 2012 5:42 pm
Forum: Lambretta Tech
Topic: A word from Ron Moss on the new Avanti Kit.....
Replies: 23
Views: 11512

Re: A word from Ron Moss on the new Avanti Kit.....

HI, I've been playing with the TT3 for a couple of months running the following set up. 110mm rod on AF crank welded pin Af Ducati ign set at 19 deg 30mm PHBH with powerjet and open carb Avanti clubman TV200 box 15 x 47 4.56 final ratio I'd been struggling with jetting on road trying all combination...
by Lambretta Sash
Sat Nov 12, 2011 12:28 pm
Forum: Dealer News, Innovations & Products
Topic: Avanti TT3
Replies: 26
Views: 10713

Re: Avanti TT3

Is that a full circle crank ?
by Lambretta Sash
Thu Nov 10, 2011 7:07 pm
Forum: Dealer News, Innovations & Products
Topic: Avanti TT3
Replies: 26
Views: 10713

Re: Avanti TT3

Varitronic set at 21/22 deg before retard hits although i will probably change this to Electrex once funds permit.

What crank are you using?
by Lambretta Sash
Wed Nov 09, 2011 9:41 pm
Forum: Dealer News, Innovations & Products
Topic: Avanti TT3
Replies: 26
Views: 10713

Re: Avanti TT3

A surreal Smooth experience 8-) Just setting mine up at moment but first impressions are good and it pulls TV200 gearing which is what i've wanted having 3 gear boxes kicking about!! Kit fits well and its handy that all components are there including the different base gaskets which makes life easy,...