Scooterotica

pasner

Interesting info here: http://www.forums.ilambretta.com/viewto ... er#p239028

pasner

Here you have some more: http://www.allstyles-scooters.com/acata ... tml#a58992 Not sure if they stock all of them.

pasner

Thanks Cezeta

pasner

Thanks Nelson, useful tip

pasner

I'm looking for a main jet larger than 135. Scoots restorations largest is 135 and need to go furtherup! Reason is a new medium tank and a remote air filter. I'm too lean now that the sh2/22 carb is flowed with air! Suggestions? Dont go too far, Im using a 142 main jet with my jetex, open mouth. St...

pasner

Here is pinascos new 225 head:

http://www.scooter-center.com/scoweb/pa ... egory2=CAT

Any experience with this head? no need of base packers if we are using it?

pasner

The MBD unit was the block of choice and I had one in the garage so I did the necessary to make that fit, only to find it wouldn't fit back in the bike! A mixture of the shape of the reed block and the angle of the inlet port on the barrel meant it failed on the frame tube as soon as I tried to fit...

pasner

Thank you rosscla

pasner

Does someone stock it? I searched all the lammy parts shops on the net with no luck. Any pic of this tool, IÂ´ve never seen one :wtf:

pasner

Hi folks, building a engine for a friend with a Rapido Classic kit, Lth Reed Manifold, PHBH 30bs carb and Cam Lam breath sweet rubber hose and hose. The side panel presses against the hose and does seem to cause running problems :o . We dont want to cut a hole in the panel so now we are looking for ...

Search found 130 matches

Re: Delorto/jetex Main jet larger than 135

Re: Delorto/jetex Main jet larger than 135

Re: PINASCO 225 VRH HEAD, anyone tryed it?

Re: Delorto/jetex Main jet larger than 135

Re: Delorto/jetex Main jet larger than 135

PINASCO 225 VRH HEAD, anyone tryed it?

Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....

Re: chain alignment tool

chain alignment tool

LTH reed manifold, PHBH 30 panel clearance issue

Login • Register

Advertising