i had years ago one but again never used it , the cruciforms are very thin !! certainly wouldnt want to put power through them ...
Cool thing to have though..
Search found 137 matches
- Wed Nov 23, 2016 9:39 pm
- Forum: Vespa Tech
- Topic: Vespa Px 5 speed
- Replies: 11
- Views: 5046
- Wed Nov 23, 2016 9:33 pm
- Forum: Vespa Tech
- Topic: Malossi or Pinasco P200 engine casings?
- Replies: 1
- Views: 1705
Re: Malossi or Pinasco P200 engine casings?
Ive built up a new motor using Pinasco reed cases, the malossi ones dont touch the pinasco in regards to strength!!! It does depend of course how much power your planning on putting through them!! After serious engine casing failures over the years (with the same set up around 28bhp) and spending al...
- Mon Oct 17, 2016 7:45 pm
- Forum: Vespa Tech
- Topic: Small frame Clutch
- Replies: 2
- Views: 1505
Re: Small frame Clutch
Xl2 clutch set up with carbon plates and stronger springs.... 18-20 brake shouldnt need anything to expensive or trick....It does depend of course how much your going to abuse it tooo ...........Loads i hope.. My old polini tuned grass track/sprint machine used a single centre spring BUT made from s...
- Mon Oct 17, 2016 7:37 pm
- Forum: Vespa Tech
- Topic: New Vespa t5 engine casings
- Replies: 20
- Views: 11369
Re: New Vespa t5 engine casings
Phew!!!!!
i managed to find a set of Pinasco reed p2 cases FROM italy for £450 inc postage ....
They look the nuts and hopefully stop my breakage issue ......
i managed to find a set of Pinasco reed p2 cases FROM italy for £450 inc postage ....
They look the nuts and hopefully stop my breakage issue ......
- Sun Mar 20, 2016 10:14 pm
- Forum: Lambretta Tech
- Topic: jetting
- Replies: 7
- Views: 2048
Re: jetting
ill try x7 back in it tomorrow
it did have a 65 choke in it before,,
i thought air leak !!! it has new crank seals, gaskets all checked ...
it did have a 65 choke in it before,,
i thought air leak !!! it has new crank seals, gaskets all checked ...
- Sun Mar 20, 2016 10:08 pm
- Forum: Lambretta Tech
- Topic: jetting
- Replies: 7
- Views: 2048
Re: jetting
Hey Adam
40 slide
new fast flow tap ....
ill check float tomorrow
thanks
40 slide
new fast flow tap ....
ill check float tomorrow
thanks
- Sun Mar 20, 2016 9:31 pm
- Forum: Lambretta Tech
- Topic: jetting
- Replies: 7
- Views: 2048
jetting
Im having trouble trying set up my 185 cc engine, 28mm, fresco, alloy cheapo 185, new points and condenser 118 main Av264 atomiser x13 needle clip at the bottom 62 idle 55 choke it starts , runs but even when hot it runs ok with the choke on and seems a bit more responsive off the throttle as its ru...
- Fri Mar 18, 2016 11:21 pm
- Forum: Lambretta Tech
- Topic: Missfire on S2
- Replies: 3
- Views: 1588
Re: Missfire on S2
What a difference, new points and condenser from camlam fitted and missfire now full-fire......now for some abuse...
- Thu Mar 17, 2016 8:56 pm
- Forum: Lambretta Tech
- Topic: Missfire on S2
- Replies: 3
- Views: 1588
Re: Missfire on S2
Bit of home work and checking the points while engines running/rev'd the points seem to be arcing ALOT !!!! large blue spark !!!
Ive just had delivered replacement points and condenser.....fingers crossed...
Ive just had delivered replacement points and condenser.....fingers crossed...
- Mon Mar 14, 2016 11:25 pm
- Forum: Lambretta Tech
- Topic: Missfire on S2
- Replies: 3
- Views: 1588
Missfire on S2
Ive just recommissioned my S2, she starts , ticks over, runs to a point well BUT if shes rev'ed quite hard she has a slight miss fire/back fire, Ive not replaced the points or condenser though ive cleaned and gaped the points hoping this would be enough, as i dont know when it last ran would it be w...