Yeah, I have one of those inline fuel filters - that might be getting restricted now that it's been on a while. Have ordered a bit of fuel hose to replace it - see if that helps - it will certainly eliminate it if that is the cause.
Search found 960 matches
- Wed Apr 18, 2018 10:32 am
- Forum: Lambretta Tech
- Topic: Stator breakdown???
- Replies: 14
- Views: 4718
- Tue Apr 17, 2018 10:05 pm
- Forum: Lambretta Tech
- Topic: Stator breakdown???
- Replies: 14
- Views: 4718
Re: Stator breakdown???
Going to strip and check the carb tomorrowgarry inglis wrote: ↑Tue Apr 17, 2018 7:23 pm just thinking alan check your rubber carb mount is tight and carb is pushed right in and check for splits
- Tue Apr 17, 2018 7:11 pm
- Forum: Lambretta Tech
- Topic: Stator breakdown???
- Replies: 14
- Views: 4718
Re: Stator breakdown???
what have you set the ignition at say23 retarding to17 it depends were its retarded to at a certain rev range especially with that kit you might be at 20dg at7000rpm instead of17 Not sure mate, I think 23 - it was checked by Chiselspeed a few weeks ago when they set it up on the dyno. It has been r...
- Tue Apr 17, 2018 6:05 pm
- Forum: Lambretta Tech
- Topic: Stator breakdown???
- Replies: 14
- Views: 4718
Stator breakdown???
Just got my scooter set up properly, new build with everything brand new - apart from the Varitronic ignition which is about 4 years old - i had it on the dyno a few weeks ago and it has been running spotless - until yesterday. Thrashing around through the gears is great but if I hit top revs, and i...
- Mon Apr 16, 2018 3:06 pm
- Forum: Lambretta Tech
- Topic: Re-rivetting end can?
- Replies: 8
- Views: 3541
Re: Re-rivetting end can?
OrderedNorrie Bodge wrote: ↑Mon Apr 16, 2018 4:13 am Use stainless Rivets m8
https://rover.ebay.com/rover/0/0/0?mpre ... 1773318598
Many thanks!- Mon Apr 16, 2018 12:06 pm
- Forum: Lambretta Tech
- Topic: Re-rivetting end can?
- Replies: 8
- Views: 3541
Re: Re-rivetting end can?
Great idea
Nice one- Mon Apr 16, 2018 9:27 am
- Forum: Lambretta Tech
- Topic: Re-rivetting end can?
- Replies: 8
- Views: 3541
Re: Re-rivetting end can?
As it warns on the advert that they aren’t best for Road they probably won’t - I’d rather sort it then it’s done.Scooterdude wrote:If the can is not to old can they not exchange it?
Sent from my iPhone using Tapatalk
- Sun Apr 15, 2018 10:11 pm
- Forum: Lambretta Tech
- Topic: Re-rivetting end can?
- Replies: 8
- Views: 3541
Re-rivetting end can?
Got a Protti exhaust on my engine - advert at CASA does say that the carbon silencer won't last as long as a aluminium end can - more suited to race rather than road use. Anyhoo, I have noticed that the silencer is starting to come loose at the rivets already. What is the best way to repair these? J...
- Mon Apr 09, 2018 12:42 pm
- Forum: Lambretta Tech
- Topic: AF 5 Speed Fitting Question
- Replies: 15
- Views: 6439
Re: AF 5 Speed Fitting Question
For those of you who have fitted the AF 5 speed boxes, did you need a selection of shims to get it right? Thinking of buying one, but didn't want to have everything pulled apart to only find I haven't got the right bits. Thanks, George. They recommend having a range of shims on hand but they also s...
- Sat Mar 31, 2018 10:20 am
- Forum: Lambretta Tech
- Topic: A wiggle on my flywheel nut!
- Replies: 10
- Views: 3511
Re: A wiggle on my flywheel nut!
Just running in my new build SS250 and find that every now and then I can feel a bit of movement when I wiggle the flywheel nut. Other times there is no movement at all - I have checked the flywheel, everything is ok there. I have taken the side casing off and checked the front sprocket bolt. It's ...