Scooterotica

jonny snatchsniffer

squish is a little large 1.5mm tops but not less than 1.2

jonny snatchsniffer

do they do the lectron in a reasonable size yet then ? ive gone for a tmx30 on my smallframe 1 cos its easier to set up for me 2 it was only Â£22 one thing i did find tho is when i rang my local motorcross bike place for jets for it, i was after a 250, as thats what ad is running on a similer set up...

jonny snatchsniffer

the higher the resistance the lower the current (amps) and vice versa, also when the motor gets hot there is less resistance

jonny snatchsniffer

as in 12v 8f or similer as f denotes fast blow fuses and if you have a power spike when the brake light goes on for example it will blow, you can get time delayed blow fuses these will have a t on them

jonny snatchsniffer

leigh wrote:thinking about it i ran loads of old iron barrels with broken fins,

Leigh

me too mostly by the exhaust port and bottom fins

jonny snatchsniffer

your fuse hasnt got f on it by any chance has it ?

jonny snatchsniffer

do away with the gasket and take material from the barrel or head to get the squish right, or use a base gasket again

jonny snatchsniffer

cut the bars to suit the grips

jonny snatchsniffer

shocky, wont you also need a 2mm packer with the 116 rod ?

jonny snatchsniffer

remove 2mm from the top of the barrel gasket face

Search found 277 matches

Re: runninig in rapido 225

Re: carb needles...........and the common prob of weak mixtures

Re: Fuse STILL blowing??

Re: Fuse STILL blowing??

Re: Broken fin on ts1

Re: Fuse STILL blowing??

Re: Head keeps coming loose on SR200 smallblock

Re: grips

Re: Duecentino

Re: Honda 205 barrell?

Login • Register

Advertising