Search found 185 matches

by johnd
Sun Jan 18, 2009 3:36 pm
Forum: Lambretta Tech
Topic: 110 Yam Rod on a SIL 200
Replies: 5
Views: 2339

Re: 110 Yam Rod on a SIL 200

cheers for that wellseal link i've been searching for that for ages!
by johnd
Sun Jan 18, 2009 11:55 am
Forum: Lambretta Tech
Topic: 110 Yam Rod on a SIL 200
Replies: 5
Views: 2339

Re: 110 Yam Rod on a SIL 200

I'm just going to build my top end. I've Yamaha 110 conrod in a standard SIL barrel with a standard size SR piston, I have the 3mm packing plate but the head is not skimmed so to get the squish I may have to put the packing plate on with gasket seal...... Has anyone tried this set up on a SIL barre...
by johnd
Wed Jan 14, 2009 8:14 pm
Forum: Lambretta Tech
Topic: pacemaker box
Replies: 20
Views: 7287

Re: pacemaker box

Ask "ketje" on here, he has used the third gear from an sx box with a drilled pacemaker box and has had very good results, still going strong in his TS1.
by johnd
Wed Jan 14, 2009 8:12 pm
Forum: Lambretta Tech
Topic: RB with remote air filter
Replies: 1
Views: 1558

Re: RB with remote air filter

I had to cut my panel on a series three just to fit the TMX35. On a standard RB manifold the float bowl was touching the panel, Li ser 3 panels. you might get away with it on a series two though.
by johnd
Mon Jan 12, 2009 8:23 pm
Forum: Lambretta Tech
Topic: RAPIDO RACE 225 GEARING
Replies: 14
Views: 6748

Re: RAPIDO RACE 225 GEARING

The race rapido can be very peaky, so i'd stick with 15/46 if you want an all rounder, although if your mate is very light he might get away with 16/46.