Search found 243 matches
- Sun Sep 08, 2019 2:54 pm
- Forum: Lambretta Tech
- Topic: ts1 30mm dellorto bgm clubman
- Replies: 3
- Views: 1920
ts1 30mm dellorto bgm clubman
hi chaps,been jetting a ts230, 30mm dellorto, bgmv3 clubman, sx200 gearbox 46 16 gearing with a lth lefthand manifold after looking on here i saw jet details of 135 main 55 pilot x7 with av266 2nd clip,40 slide,which i started with bike ran well but was boggy upto 1/8 throttle and felt weak mid rang...
- Wed Sep 04, 2019 8:59 pm
- Forum: Lambretta Tech
- Topic: Replace gp floor strut
- Replies: 10
- Views: 5114
Re: Replace gp floor strut
ive done a couple of these,you need to clamp a long straight edge between the front leg shield support and the rear runner board support and your new support is clamped to the angle,the new support needed grinding to get a good fit ,your gap does look big,also if you have side panels you need to fit...
- Fri Aug 09, 2019 7:58 pm
- Forum: Lambretta Tech
- Topic: ts1 no compression after new piston
- Replies: 3
- Views: 2237
ts1 no compression after new piston
mates ts1 was running rough and using loads of petrol,so we decided to put new reed petals in,we discovered what looked like a crack in the bridge between the two windows,so we got a new asso piston. top end was rebuilt with new gaskets and good sealant,came to start and there was hardly any compres...
- Wed Jul 31, 2019 3:57 pm
- Forum: Lambretta Tech
- Topic: yamaha conrod questions
- Replies: 3
- Views: 1733
Re: yamaha conrod questions
cheers,grampian motors have mitaka ke175d conrods in stock and want £20 to turn the pin down or af have pins at £12,so will have a measure up when i split crank,but the ke rod is looking favourite,cheers
- Tue Jul 30, 2019 7:55 pm
- Forum: Lambretta Tech
- Topic: yamaha conrod questions
- Replies: 3
- Views: 1733
yamaha conrod questions
hi all,got a rb crank with a knackered big end,so going to have a go at pressing pin out ,trueing back up and tig welding the pin. the crank measures 40.64mm over the webs and conrod measures 15mm wide at big end, so looking at the rd/dt175 mx rod which is 16mm wide at the big end,and will run with ...
- Fri Apr 05, 2019 9:25 pm
- Forum: Lambretta Tech
- Topic: Inboard disc
- Replies: 5
- Views: 2253
Re: Inboard disc
wouldnt bother with a cable operated one,spent hours trying to get a one to work that came on a tv 175,lever went all way back to the grip with standard and reverse pull set up. new actuator still the same.so he decided to buy a new remade one,guess what still the same and the speedo was erratic,sup...
- Sat Mar 23, 2019 10:59 am
- Forum: Lambretta Tech
- Topic: cable operated front disc poor performance
- Replies: 6
- Views: 3541
Re: cable operated front disc poor performance
yeah disc floats on pins,even tried a new actuator,with everything adjusted up so the disc is slightly rubbing on the pads, the brake lever is hitting the handle bar grips,due to the travel in the actuator arm. you can also just move the wheel with your hand when the lever is back to the grip. due t...
- Tue Mar 19, 2019 10:42 pm
- Forum: Lambretta Tech
- Topic: cable operated front disc poor performance
- Replies: 6
- Views: 3541
cable operated front disc poor performance
Hi,chaps a mate has just bought a tv175 with a repro front disc, cable operated, in reverse pull style.with everything properly adjusted the brake lever is hitting the grips before any braking happens,we have put new pads in etc. the actuator seems a very sloppy fit in the backplate,and the actuator...
- Sun Feb 24, 2019 11:37 am
- Forum: Lambretta Tech
- Topic: beedtronic advance retard unit
- Replies: 0
- Views: 4201
beedtronic advance retard unit
hi all,got a beedtronic advance retard unit from beedspeed to fit for a mate,hasn't come with any instructions ???.
does anyone know the static timing or how much it should advance,can't get any sense out of beedspeed,cheers all
does anyone know the static timing or how much it should advance,can't get any sense out of beedspeed,cheers all
- Thu Jan 17, 2019 9:31 pm
- Forum: Lambretta Tech
- Topic: speedo drive for scoot rs disc
- Replies: 1
- Views: 1182
speedo drive for scoot rs disc
is the scoot rs disc brake speedo drive same dimensions as original lambretta hub one's looking to replace the scootrs one with a all metal assembly from ebay,cheers