Search found 795 matches
- Sun Nov 29, 2015 7:06 pm
- Forum: Lambretta Tech
- Topic: Drive side seal not air tight
- Replies: 13
- Views: 5402
Re: Drive side seal not air tight
How much air / pressure are you pumping in ? It should only be about 8psi , too much pressure and any seal will leak .
- Tue Nov 17, 2015 12:02 am
- Forum: Lambretta Tech
- Topic: Electrex stator plate- odd wiring!
- Replies: 6
- Views: 2867
Re: Electrex stator plate- odd wiring!
heres my cdi (master igniter) There are actually three yellow wires (for the lights) from the stator ...ones not used , and is pushed back into the sheathing in this pic. http://i630.photobucket.com/albums/uu26/annierussell/Shared%20album/20131002_215354_zps45529b17.jpg http://i630.photobucket.com/a...
- Mon Nov 16, 2015 10:32 pm
- Forum: Lambretta Tech
- Topic: Electrex stator plate- odd wiring!
- Replies: 6
- Views: 2867
Re: Electrex stator plate- odd wiring!
I take it you have the electrex flywheel as well ? Early ones need a different cdi to the "normal" vespa type . There are at least two to my knowledge, a black "master igniter" abd a red one which loots the same as an "auto" one. Ive been told they can be altered to us ...
- Tue Nov 10, 2015 11:16 pm
- Forum: Lambretta Tech
- Topic: Shimply a waste of time
- Replies: 10
- Views: 4077
Re: Shimply a waste of time
i had a similar thing a few weeks ago ? I swapped the engine internal from one engine to another case, the donor case had been stripped of its original internals by myself a few months before. But when i tightened the endplate up, the gear box locked up ?? so by a process of elimination , ie taking ...
- Tue Nov 10, 2015 2:25 pm
- Forum: Lambretta Tech
- Topic: Layshaft / Gearbox Endplate Problem
- Replies: 2
- Views: 1441
Re: Layshaft / Gearbox Endplate Problem
Sound like you haven't pulled the layshaft through full , it may be stuck on the o ring ?
The rear hub bearing wount be 5mm out ! Im sure you would /should of noticed that much .
The rear hub bearing wount be 5mm out ! Im sure you would /should of noticed that much .
- Mon Nov 09, 2015 11:07 pm
- Forum: General Scooter Chat
- Topic: Without a battery
- Replies: 16
- Views: 5743
Re: Without a battery
koso do a small rectifier , ive used one in the past and velcroed it to the inside of my headset
http://www.digital-speedos.co.uk/12-vol ... -132-p.asp
http://www.digital-speedos.co.uk/12-vol ... -132-p.asp
- Sun Nov 08, 2015 4:54 pm
- Forum: Lambretta Tech
- Topic: modified casing or packer ?
- Replies: 2
- Views: 1423
Re: modified casing or packer ?
Wot he said ^
- Thu Nov 05, 2015 12:29 am
- Forum: Lambretta Tech
- Topic: PHBH 28FS ????
- Replies: 5
- Views: 3145
- Thu Nov 05, 2015 12:20 am
- Forum: Lambretta Tech
- Topic: PHBH 28FS ????
- Replies: 5
- Views: 3145
Re: PHBH 28FS ????
its a 4 stroke carb .
it can be converted to a 2 stroke quite easily
it can be converted to a 2 stroke quite easily
- Sat Oct 31, 2015 7:50 pm
- Forum: Lambretta Tech
- Topic: Engine test bed wiring
- Replies: 7
- Views: 2860
Re: Engine test bed wiring
Pompeydave wrote:Ok cheers guys- what about the yellow coming from the CDI, does it need to go to earth on the engine?
carlos fandango wrote:Red white and green off the stator to the cdi , thr yellow is the lighting wire which normally goes to the reg .