Hi there
Have picked up a scorpion exhaust and am going on put it on my T5. It has a polini 152.
Can someone advise jetting for this.
Cheers Bruce
Search found 56 matches
- Fri Jun 20, 2014 7:33 am
- Forum: Carburettor Set-ups
- Topic: T5 with Poliini 152
- Replies: 0
- Views: 1464
- Fri Apr 18, 2014 7:41 pm
- Forum: Vespa Tech
- Topic: No lights
- Replies: 1
- Views: 1223
No lights
Problems with lights on a Mk1 PX I have. Lights no longer work. Have checked with a multi meter at indicator socket and am only getting 5volts. Have changed regulator for 1 that works but no joy. All the bulbs are ok. Multi meter going straight from indicator socket to engine casing. Any ideas. Chee...
- Wed Mar 05, 2014 8:29 pm
- Forum: Vespa Tech
- Topic: hub studs
- Replies: 5
- Views: 1227
hub studs
Whilst changing the tyre on my rear hub I have stripped a couple of threads on the rear hub. I have been able to get the old studs out. Is there any issues of replacing these studs with an M8 bolt of suitable length.?
Cheers Bruce
Cheers Bruce
- Wed Jan 15, 2014 8:06 pm
- Forum: Vespa Tech
- Topic: Rally
- Replies: 15
- Views: 6849
- Wed Jan 08, 2014 7:57 pm
- Forum: Vespa Tech
- Topic: Fitting a replacement Vespa legshield badge
- Replies: 2
- Views: 2138
Re: Fitting a replacement Vespa legshield badge
I use these. Hold badge on front legshield and push clip on with pliers.
http://beedspeed.com/vespa-badge-clip-f ... -2132.html
Cheers Bruce
http://beedspeed.com/vespa-badge-clip-f ... -2132.html
Cheers Bruce
- Tue Jan 07, 2014 9:19 pm
- Forum: Vespa Tech
- Topic: T5 - 172 Malossi advice
- Replies: 3
- Views: 3326
T5 - 172 Malossi advice
Hi there Got a standard T5 at the moment and am looking to change to a 172 kit. Have looked into various things and am looking for advice on the clutch, at the moment it is a standard 7 spring 20/68 tooth is this ok. Have read some people say to change this to 21/68, what benefit would this give ( i...
- Tue Nov 05, 2013 9:07 pm
- Forum: Vespa Tech
- Topic: reprofile cylinder head for t5 to 172
- Replies: 16
- Views: 3896
reprofile cylinder head for t5 to 172
Am looking to get a malossi 172 kit for my T5. Looking for somewhere to reprofile a 125 head to suit this kit. Have seen Beedspeed do this but am looking for somewhere that is recommended rather than first place I see. Can any one recommend somewhere to get this done as never done this before with c...
- Fri Jul 19, 2013 8:32 am
- Forum: Vespa Tech
- Topic: cosa clutch for a T5
- Replies: 6
- Views: 2580
Re: cosa clutch for a T5
Eventually got round to looking in to this properly. In the end all I had to do was change the push rod and pressure plate. These were both badly worn when compared to new ones. Clutch now works easily. Good result only spent £5 instead of £100 for a new clutch. Just to let you know in case anyone h...
- Sun May 12, 2013 7:36 pm
- Forum: Vespa Tech
- Topic: Stuck on full revs
- Replies: 3
- Views: 1872
Stuck on full revs
Out riding today and a couple of times the scoot stuck on full revs. first time at a roundabout dipped throttle but no joy first thought is a stuck throttle cable but second time coming up to junction same happened dropped throttle and held clutch in but engine was racing on full revs pulled up and ...
- Sat Apr 27, 2013 11:30 am
- Forum: Standard Scoots & Restorations
- Topic: Spirito di Sei Giorni (Spirit of Six Day)
- Replies: 112
- Views: 32851
Re: Spirito di Sei Giorni (Spirit of Six Day)
Great project. I moan about basic maintenance on my T5.