Search found 56 matches
- Mon Apr 25, 2016 7:20 pm
- Forum: General Scooter Chat
- Topic: Scootopia 22mm carb set up
- Replies: 15
- Views: 10010
Scootopia 22mm carb set up
Hope it's ok to post this here, seems to be read by more than on the carb page. AF Rayspeed 175 top end, standard exhaust, and a Scootopia 22mm carb. I have a 150 atomiser and slide, and a 200 atomiser and slide as supplied with the carb. Anyone know the best combination of slide and jets to suit th...
- Thu Apr 07, 2016 6:52 am
- Forum: Lambretta Tech
- Topic: Lambretta 'breathing problem'
- Replies: 11
- Views: 5221
Re: Lambretta 'breathing problem'
Definitely, something I always double check
- Wed Apr 06, 2016 9:39 pm
- Forum: Lambretta Tech
- Topic: Lambretta 'breathing problem'
- Replies: 11
- Views: 5221
Re: Lambretta 'breathing problem'
The rubber is brand new, but I'll check it anyway. Cheers
- Wed Apr 06, 2016 5:19 pm
- Forum: Lambretta Tech
- Topic: Lambretta 'breathing problem'
- Replies: 11
- Views: 5221
Re: Lambretta 'breathing problem'
Engine just had a full rebuild. So first time running. Seems to want to cut out as soon as the rubber hose goes near the carb. But will start easy from cold. Runs 30 seconds and bogs down and wwants to die
- Wed Apr 06, 2016 7:25 am
- Forum: Lambretta Tech
- Topic: Lambretta 'breathing problem'
- Replies: 11
- Views: 5221
Re: Lambretta 'breathing problem'
Changed the airbox and scoop for a S3 one, not even using a filter element. Airways completely clear
- Tue Apr 05, 2016 10:52 pm
- Forum: Lambretta Tech
- Topic: Lambretta 'breathing problem'
- Replies: 11
- Views: 5221
Lambretta 'breathing problem'
Any ideas on this one guys? Lambretta, 175 top end, 42mm clubman, 22mm carb. Starts first go from cold but quickly starts choking itself. Take the air hose off, runs sweet as a nut! Put the rubber back on and it dies. Clear airway through hose and air filter box/scoop. Even removed the filter elemen...
- Fri Apr 01, 2016 4:27 pm
- Forum: Standard Scoots & Restorations
- Topic: Series 1 and early Series 2 rear light bulbs?
- Replies: 1
- Views: 2453
Series 1 and early Series 2 rear light bulbs?
Anybody know what wattage the festoon bulbs are for S1 and early S2 rear light. Tail light and stoplight. Also, is the stoplight in the centre or at the sides? Thanks
- Tue Jul 14, 2015 3:45 am
- Forum: Carburettor Set-ups
- Topic: 28 mm dellorto spit back
- Replies: 8
- Views: 7127
28 mm dellorto spit back
Just fitted a 28mm dellorto to a standard cast iron 200 Lambretta, along with a Scootopia clubman type exhaust. Main jets supplied with the carb were 110 and 105. Revs better with the 105 but seems to be spitting a lot of excess fuel out. Tried it with a remote filter and it seems to be flooding, bu...
- Sun May 31, 2015 10:11 pm
- Forum: Lambretta Tech
- Topic: 200 engine not revving properly
- Replies: 12
- Views: 4382
Re: 200 engine not revving properly
Yep, I'm going to try that setup in the morning, sounds about right. Cheers
- Sun May 31, 2015 3:31 pm
- Forum: Lambretta Tech
- Topic: 200 engine not revving properly
- Replies: 12
- Views: 4382
Re: 200 engine not revving properly
Cheers Mick