I ordered this one and its a perfect fit
https://rover.ebay.com/rover/0/0/0?mpre ... 3288375830
Just a note though.. The bush looks too small until you push the steel sleeve through the rubber bush.
Search found 388 matches
- Sun Apr 28, 2019 6:45 pm
- Forum: Lambretta Tech
- Topic: Bushes for Escorts Rear Damper
- Replies: 6
- Views: 2679
- Sat Apr 06, 2019 3:45 pm
- Forum: Lambretta Tech
- Topic: S3 layshaft slop
- Replies: 18
- Views: 5867
Re: S3 layshaft slop
Yep very much so, it can be a combination of end plate bearing cup, end plate bearing, the layshaft and the hub bearing. 0.02mm mm wear on the layshaft or the the bearing cup can result in huge differences.
- Mon Mar 25, 2019 12:45 pm
- Forum: Lambretta Tech
- Topic: Calling Corrado!
- Replies: 3
- Views: 1928
Calling Corrado!
Trying to reach Martin, something is wrong with my messenger and his site isn't accepting my email.
If someone has a direct email or number would appreciate if you can send it to me.. Thanks
Rob
If someone has a direct email or number would appreciate if you can send it to me.. Thanks
Rob
- Mon Mar 18, 2019 11:34 am
- Forum: Lambretta Tech
- Topic: S3 layshaft slop
- Replies: 18
- Views: 5867
Re: S3 layshaft slop
This other Spanish endplate bush is 24.3 and a good fit with bearing and layshaft so it looks like anything under 24 is worn and could lead to play on the wheel Sent from my SM-A320FL using Tapatalk Sorry, If I'm being thick, but I presume you're measuring the ID of the bearing track? Assuming the ...
- Mon Mar 18, 2019 11:27 am
- Forum: Lambretta Tech
- Topic: Uni Hub 8 or 11 degrees?
- Replies: 0
- Views: 4137
Uni Hub 8 or 11 degrees?
As per title. Does anyone know the angle of the uni hubs? I couldnt find anything online.
- Sun Mar 17, 2019 8:18 pm
- Forum: Lambretta Tech
- Topic: S3 layshaft slop
- Replies: 18
- Views: 5867
Re: S3 layshaft slop
Cheers Gary, just saw the reply now. My shafts are marginally smaller but the bush Is also smaller.
- Sat Mar 16, 2019 10:40 pm
- Forum: Lambretta Tech
- Topic: S3 layshaft slop
- Replies: 18
- Views: 5867
Re: S3 layshaft slop
New replacement bush is too big.. Typical
- Sat Mar 16, 2019 8:07 pm
- Forum: Lambretta Tech
- Topic: S3 layshaft slop
- Replies: 18
- Views: 5867
Re: S3 layshaft slop
As Gary has suggexyed/suspected, the new bush/bearing cage is a big bigger compared to an original unit. Would anyone have an MB layshaft and a good set of digital verniers or a micrometer and can measure the end of the layshaft for me so I can compare to mine before I lay out £150 for a new one.
- Sat Mar 16, 2019 6:14 pm
- Forum: Lambretta Tech
- Topic: S3 layshaft slop
- Replies: 18
- Views: 5867
Re: S3 layshaft slop
So side case off and there is some movement of the shaft at the end plate needle cage.. That's a bit s**t as I had replaced the needle roller and the holder during the rebuild.. It could also be the shaft.
- Sat Mar 16, 2019 5:39 pm
- Forum: Lambretta Tech
- Topic: S3 layshaft slop
- Replies: 18
- Views: 5867
Re: S3 layshaft slop
Will start taking the side case off and see what's going on inside. Strangely there is more movement when on the stand compared to rear wheel off the ground.