Search found 140 matches

by Dell Oughta
Sat Sep 20, 2014 9:00 pm
Forum: Lambretta Tech
Topic: Hydraulic hose route on Spanish Li150 S2
Replies: 31
Views: 9857

Re: Hydraulic hose route on Spanish Li150 S2

Some pics on my basket build thread ref routing the hose through the headset bolt hole
http://scooterotica.org/forum/viewtopic ... 1&start=10

Mike
by Dell Oughta
Mon Jul 14, 2014 9:37 pm
Forum: Dealer News, Innovations & Products
Topic: Change in drum size for 2T oil
Replies: 12
Views: 15359

Re: Change in drum size for 2T oil

Used this oil on my trip to this years euro....no problems ;)

Mike
by Dell Oughta
Thu May 15, 2014 12:37 pm
Forum: Dealer News, Innovations & Products
Topic: Handlebar choke kit /cooling/tuning aid/engine saver
Replies: 66
Views: 41490

Re: Handlebar choke kit /cooling/tuning aid/engine sa

Fitted my choke kit (came up through the fork tube, and through the headset bolt hole as its uber tight in the S1 head set, at the carb end I used a 90 degree elbow), I will re route it a later date but it'll do for now (cheers Darrell for the speedy delivery of this well made piece of kit) http://i...
by Dell Oughta
Tue Apr 15, 2014 8:30 pm
Forum: Lambretta Tech
Topic: Fitting a diablo long range tank into a Spanish series 2.
Replies: 12
Views: 3441

Re: Fitting a diablo long range tank into a Spanish series 2

I have one in my Series 1, my top tip, is to but some rubber fuel hose (the thick sort you can get from Halfords), cut a few 5" lengths and put a long cable tie through each length of hose, and put these around the frame tube (one at front 1 at rear, below where the tank is located) as a bit of...
by Dell Oughta
Tue Nov 12, 2013 11:17 pm
Forum: General Scooter Chat
Topic: Ricspeed - Rich Smith - Rest In Peace
Replies: 133
Views: 55395

Re: Ricspeed - Rich Smith - Rest In Peace

RIP ricspeed
by Dell Oughta
Tue Sep 10, 2013 8:47 pm
Forum: Show us yer Scoots!!
Topic: Series 1 Project 59 Frame Breather
Replies: 64
Views: 23198

Re: Series 1 Project 59 Frame Breather

Bang Tidy! :P
Mike
by Dell Oughta
Wed May 29, 2013 5:02 pm
Forum: Lambretta Tech
Topic: new 5/6 plate clutch for lambrettas
Replies: 194
Views: 80734

Re: new 5/6 plate clutch for lambrettas

right boys and girls , finally got somewhere with my own redesign ,no longer using aprillia baskets and plates due to machining time and availability , im now using a yamaha derived plate and my own cast basket that im now happy with , ive currently machined ten 5 plate 46 tooth clutches and am abo...
by Dell Oughta
Tue May 28, 2013 6:17 pm
Forum: Lambretta Tech
Topic: new 5/6 plate clutch for lambrettas
Replies: 194
Views: 80734

Re: new 5/6 plate clutch for lambrettas

Rocho, or any other grown up on here
I need some new plates for my rocho clutch, does anyone know the exact type I need to order?

Ta

Mike
by Dell Oughta
Fri Apr 19, 2013 7:43 pm
Forum: Show us yer Scoots!!
Topic: In Rust we Trust
Replies: 22
Views: 9234

Re: In Rust we Trust

bonkers with a twist!

Mike