Search found 1197 matches
- Sat Apr 21, 2012 8:26 pm
- Forum: Lambretta Tech
- Topic: long range tank fitting problem...
- Replies: 36
- Views: 7956
Re: long range tank fitting problem...
i recently fitted one of the Saigon Scooter Centre tanks - no major problems Placed it without rubbers for a dry run to see what the clearance was like - could see it was going to be tight at the tap so I reduced the thickness of the back outrigger rubbers and the ones on the tank seam to allow the ...
- Sat Apr 21, 2012 8:07 pm
- Forum: Lambretta Tech
- Topic: octane booster
- Replies: 4
- Views: 2031
Re: octane booster
i`ve been running my TS1`s on standard unleaded since it came in (both heads were changed at the time with ones done by chiselspeed) both on original pistons with 1000`s of trouble free miles (regular top checks, new rings and reeds and oil changes) Both a touch over jetted - plug on dark side but t...
- Mon Apr 16, 2012 4:42 pm
- Forum: Paint & Bodywork Tech
- Topic: Pinstriping in essex
- Replies: 4
- Views: 2339
Re: Pinstriping in essex
si clark in colchester
- Sat Apr 14, 2012 7:18 pm
- Forum: Vespa Tech
- Topic: Vespa PX Disc - Black Levers ?
- Replies: 9
- Views: 4188
Re: Vespa PX Disc - Black Levers ?
you can get a pattern set - i bought some - some time ago from Perry Lewis at Totally Scooters
- Thu Apr 12, 2012 8:09 pm
- Forum: Vespa Tech
- Topic: px carb gasket...again
- Replies: 6
- Views: 1460
Re: px carb gasket...again
see my post in response to your gasket quiz
- Thu Apr 12, 2012 8:06 pm
- Forum: Vespa Tech
- Topic: Vespa carb gasket Quiz
- Replies: 2
- Views: 1721
Re: Vespa carb gasket Quiz
they can be used - from top to bottom 1. top one is carb to carb box (auto lube and non autolube) 2. next one is carb box to engine casing (non autolube) 3. next one is orignal carb to carb box (original number 1 probably genuine or from a good replacement gasket set) 4. bottom one is carb box to en...
- Mon Apr 02, 2012 12:41 pm
- Forum: Vespa Tech
- Topic: Thin ring/quality piston options for standard PX/Rally200?
- Replies: 4
- Views: 1683
Re: Thin ring/quality piston options for standard PX/Rally20
Don`t Harrys pistons start at 68mm (210cc) ?
- Tue Mar 27, 2012 5:17 pm
- Forum: Vespa Tech
- Topic: Vespa P2/Lam TS1 Exhaust stub conversion
- Replies: 1
- Views: 1150
Re: Vespa P2/Lam TS1 Exhaust stub conversion
worb 5 have been doing it for years http://www.worb5.com/vespa_lambretta_scooter_tuning_EN/cylinder_barrel_porting_reworking_alu.html Think MB may have done it aswell cant understand why malossi and pinasco never picked up this as it is the best way forward - vespa did it with T5 from day 1 for a re...
- Mon Mar 26, 2012 12:09 pm
- Forum: Vespa Tech
- Topic: Bitubo front shocks
- Replies: 3
- Views: 1350
Re: Bitubo front shocks
I had a drum type bitubo and changed to a old type grimeca set up (criss cross front hub)- onlt thing i had to do was to machine down the head of the two M8 bolts that hold the caliper to the back plate - later changed to a standard vespa disc set with star shaped hub and no additional problems at a...
- Wed Mar 14, 2012 2:14 pm
- Forum: Lambretta Tech
- Topic: thread size on crankshaft
- Replies: 5
- Views: 1698
Re: thread size on crankshaft
m12 x 1mm pitch lefthand thread
depends how bad the threads are - can you get away with a thread file ?
depends how bad the threads are - can you get away with a thread file ?