Search found 338 matches

by bazza3004
Sat Jun 17, 2017 4:11 pm
Forum: Carburettor Set-ups
Topic: Monza 225 phbh 30 and tsr evo exhaust
Replies: 5
Views: 2981

Re: Monza 225 phbh 30 and tsr evo exhaust

Have you tried a 40 slide. I ran a TS 230 (yeh i know that aint a monza) on the x13 av266 with no issues temp wise. Hope this helps.
by bazza3004
Wed Jun 14, 2017 3:54 pm
Forum: Lambretta Tech
Topic: GP200 CENTER STAND REMOVAL/ REFITTING.
Replies: 7
Views: 3035

Re: GP200 CENTER STAND REMOVAL/ REFITTING.

It could be that the two bits that stick up on the top of your stand (the bits that butt up against your frame strutt) are bent. Iirc these should be inline with the stand legs.
by bazza3004
Wed Jun 14, 2017 8:55 am
Forum: Lambretta Tech
Topic: Fitting LTH clutch - order?
Replies: 13
Views: 4986

Re: Fitting LTH clutch - order?

Not sure if you know this but if you grind down the outside circumfrence of the socket used to tighten the nut it will fit in and you can remove the clutch like a cassette type should you want to get to gearbox etc and save time on stripping plates out etc.
by bazza3004
Thu Jun 01, 2017 8:09 pm
Forum: Lambretta Tech
Topic: Lambretta crank
Replies: 21
Views: 7640

Re: Lambretta crank

As mentioned it seems to be the copper coloured rods that are the weaker. Think prior to these they were shiney silver rods. Many folk use them including myself (imola) without issue so think you will be fine unless its putting out higher hp/torque figures.
by bazza3004
Wed May 31, 2017 1:25 pm
Forum: Lambretta Tech
Topic: Lambretta crank
Replies: 21
Views: 7640

Re: Lambretta crank

The mec crank would be fine and are good value. Got the 60/107 from glasgow lambretta a couple of years ago and used it in an imola with no issues
by bazza3004
Sun May 28, 2017 12:05 am
Forum: Lambretta Tech
Topic: My new set up.
Replies: 6
Views: 2888

Re: My new set up.

Does it smoke all the time low down or after you have give it a blast. Also what 2t oil are you using.
by bazza3004
Tue May 23, 2017 9:24 pm
Forum: Lambretta Tech
Topic: Adjusting Phbh with need clip on monza
Replies: 7
Views: 2413

Re: Adjusting Phbh with need clip on monza

Try with a AV266 and X13
by bazza3004
Tue May 09, 2017 10:30 pm
Forum: Lambretta Tech
Topic: Jetting advice please - TS1/Race/TMX35
Replies: 4
Views: 1799

Re: Jetting advice please - TS1/Race/TMX35

Changed mine to a 56 2nd clip down iirc and it improved mine.
by bazza3004
Mon May 08, 2017 12:37 pm
Forum: Lambretta Tech
Topic: Low down splutter... won't Rev.
Replies: 8
Views: 2774

Re: Low down splutter... won't Rev.

Have you tried removing the bellows from the carb when this happens to see if it improves
by bazza3004
Tue Apr 25, 2017 10:32 pm
Forum: Lambretta Tech
Topic: Gear Oil
Replies: 6
Views: 3089

Re: Gear Oil

Use motul 10/30 transoil in my TS1 with cassette clutch but recently changed the standard 4 plate in mates Li and had to use the same oil in this as its all i had available and he needed the scoot. He says it works fine with this oil in and so far hasnt had any drag or slip issues.

cron