Scooterotica

Steveshipley

Init time we took a breather from this and answered my worry about a backfire in lambretta tech please (lol)

Steveshipley

Hi, one of my engines is playing up a bit. Starts and runs well but occasionally backfires. I can't pin it down to anything specific though. I changed the cdi, and also for other reasons swapped a 26mm jetex for a 26mm delorto some time ago, but I'm still getting the backfire. It's an early (2005 is...

Steveshipley

Li 150 gearbox with 16x46 sprockets bgm clubman and 30mm delorto. Great cruising set up at 60 mph, will touch 70.

Steveshipley

^^^^^
|||||

Now that IS nice, really liking the colours bud.

Steveshipley

Dunno then?
One of mine was stuck and I had to hit it quite hard and move the drift around the bearing. You could try knock it back in a bit then give the circlip area a bit of a clean with wire wool and then grease it. Then try again.

Steveshipley

Knock from the inside outwards. You've got to move the spacer to get a screwdriver (drift) on the bearing.

Steveshipley

Not on a series 3 - piece of cake. but my mate had a nightmare trying to fit one to his kitted S1.

Steveshipley

Thanks chaps cleaned it and changed jubilee. See how it goes now tightened as you suggested

Steveshipley

Is there a knack to using a rubber carb mount on a lambretta manifold?
For reason I won't bore you with, got a deli 26mm on a mugello small bore 200
kit and the carb has come off twice now. Am I doing it up too tight or not enough ?
The rubber parts company with the manifold not the carb

Ta steve

Search found 69 matches

Re: LCGB - BLOA - Concessionaires......confusion

Backfire

Re: Mugello 186, best set up.

Re: show us your series 2 eibars

Re: Front Hub Bearings

Re: Front Hub Bearings

Re: Aaaaaaaaaaaaaaaaaaaaagggggggggggggggg!

Re: Rubber mounting

Rubber mounting

Login • Register

Advertising