Search found 395 matches
- Thu Aug 31, 2017 6:15 pm
- Forum: Lambretta Tech
- Topic: question about gear selector arm compatibility
- Replies: 9
- Views: 2880
Re: question about gear selector arm compatibility
Yes the GP will interchange with the LI no problem. If you really need a good Innocenti 2 piece I can take a look, I have a lot of that hardware. Assume you need the arm, shaft, bolt, washer, clip, O ring and shim (basically the whole assembly). wow that was quick :D Yes please..I need the arm and ...
- Thu Aug 31, 2017 5:46 pm
- Forum: Lambretta Tech
- Topic: Engine parts rebuild list ?
- Replies: 4
- Views: 2042
Re: Engine parts rebuild list ?
Wow thats brilliant ! thanks sorry for the delayed response (note to self ...must remember to set posts to instant notification doh......) I started making a list myself yesterday so I'll check my list with this one and post when finished. Cheers Corrado ;) Here's a start ..... Not my work, forget w...
- Thu Aug 31, 2017 5:43 pm
- Forum: Lambretta Tech
- Topic: question about gear selector arm compatibility
- Replies: 9
- Views: 2880
question about gear selector arm compatibility
I had hoped to buy a used Innocenti gear selector arm and shaft for a series 3 Li150 but no luck yet so I was looking at buying new. Can anyone please tell me if a one piece GP gear selector arm and shaft will fit a series 3 Li150 case ok ? If so will the earlier selector fork fit to the GP Shaft ? ...
- Wed Aug 30, 2017 12:38 pm
- Forum: Lambretta Tech
- Topic: Engine parts rebuild list ?
- Replies: 4
- Views: 2042
Engine parts rebuild list ?
has anyone ever compiled a complete check list of the basic parts needed for ...say a standard series 3 Li150 engine rebuild ? could be handy for anyone like me who is in the process of collecting bits for a spare crankcase build
- Wed Aug 30, 2017 12:28 pm
- Forum: General Scooter Chat
- Topic: Standardish Lambretta Set Ups
- Replies: 16
- Views: 5442
Re: Standardish Lambretta Set Ups
this is an interesting question ! Seems like there are plenty of us that are quite content with a 'standardish ' engine which is quite a suprise to me. Lots of the adverts in magazines and various articles etc seem to suggest that most Lambretta owners are only interested in spending megga bucks in ...
- Wed Jul 26, 2017 12:15 am
- Forum: Lambretta Tech
- Topic: Fitting Condenser!
- Replies: 5
- Views: 2126
Re: Fitting Condenser!
you'll be able to do it in your sleep soon martin ;) Thats a good suggestion about fiting the condensor outside the mag housing but its a pita to find somewhere to mount it and run the wire. I fitted 3x brand new condensors on my special when I first got it. They were all faulty supplied by a promin...
- Fri Jul 21, 2017 8:45 pm
- Forum: Lambretta Tech
- Topic: Standard Li150 Special Pacemaker Performance
- Replies: 20
- Views: 6526
Re: Standard Li150 Special Pacemaker Performance
sounds like you've got the perfect weekend lined up martin . I'm sure that 20mm will be adequate provided everything else is spot on. let us know how you get on. Dewsbury eh mmm I seem to remember my Company manufactured and installed all the Digital interactive Audio equipment in the Dewsbury Museu...
- Fri Jul 21, 2017 3:22 pm
- Forum: Lambretta Tech
- Topic: Standard Li150 Special Pacemaker Performance
- Replies: 20
- Views: 6526
Re: Standard Li150 Special Pacemaker Performance
I have a 64 LiS150 special running an original engine and gear set as far as I know. I have fitted a Jetex 22mm carb with 150m slide , 5899-2 Atomiser 50 pilot 106 Main jet and a standard exhaust 3% fuel/oil mix with the timing set at 19 degrees. Mine will cruise at an indicated 55mph with some left...
- Wed Jul 05, 2017 9:41 pm
- Forum: Lambretta Tech
- Topic: erratic idle cutting out on deacceleration
- Replies: 10
- Views: 4646
Re: erratic idle cutting out on deacceleration
I'll take a looksee thank you Mr G .Mr G in NYC wrote:Try using IMGUR as a photo host . much easier than photo f@@k it !! LOL G.
I have a Flickr account but I cannot find a way to embed an image in my post on this forum.
- Wed Jul 05, 2017 10:28 am
- Forum: Lambretta Tech
- Topic: erratic idle cutting out on deacceleration
- Replies: 10
- Views: 4646
Re: erratic idle cutting out on deacceleration
nice guess paul but the engine functions normally at all other throttle positionsHxPaul wrote:The fuel cap air vent was blocked.