Scooterotica

a.lo.v2

i have recently fitted a small atomic to a 225 race rapido which i have been having horrendous spitbak from. fresh hone and new rings did not cure it. cured now but cannot get it jetted right , engine acts rich but plug says weak dyno needed have upjetted alot from previous settings PWK 26. having s...

a.lo.v2

Snails wrote:Anyone? I've shortened the throttle cable so the loop is not so long and also greased the cable - to no effect

i thought you were not supposed to grease lined cables i have used dry graphite though.

a.lo.v2

tighten them up ...... sorry. if the head is not leaking does this mean the problem is at the bottom and travelling up the barrel stud holes? i.e cracks in the casing threads or gasket.

a.lo.v2

i built a spare engine up with a 60mm crank and fitted the only usable top end i had which was a standard old sx/gp, 200, three ring, new rings, quick hone . the 110mm rod meant a 2.5 packer, gasket either side to level exhaust at BDC. ran it for a while but it was always a compromise because of the...

a.lo.v2

there are probably no impartial sites to be found, as are there are NO facts on either side, if you are undecided probably go to equal number of in/out and make your own mind up. there is no wrong or right. my concern is i cannot find any FACTS on the actual voting process i.e a clear mandate either...

a.lo.v2

surprising then that the genuine Piaggio part does not fit?

a.lo.v2

some one i know had this problem and contacted Dellorto and they said the white ones should not be supplied in the UK.

a.lo.v2

surely 1/4 to 3/4 is the needle taper mostly? why initially to be safer did you raise the clip which lowers the needle and weakens the mix?

a.lo.v2

is this the latest type that was supposed to cure some fitment issues? i could not get an af clubman to fit with a packer at all so got a bgm.

a.lo.v2

quite like the idea of getting a SIP xxl tank, but how do you fix the tap as the filler is set to the rear and not above the tap, is there another tap wrench to get or is there a trick

Search found 113 matches

Re: Atomic Reed Valve on Rapido

Re: Throttle return

Re: My nuts are leaking! Ooer :-)

Re: stage 4 200 and a 60mm stroke!!!!!!!!!!!

Re: EU, in or out?

Re: More s**t parts.

Re: dellorto phbh 30 which float's

Re: Plug colour......

Re: Exhaust slightly touching cowl bolt

xxl tank

Login • Register

Advertising