Search found 204 matches
- Wed Aug 21, 2013 10:36 pm
- Forum: Lambretta Tech
- Topic: jets sizes
- Replies: 1
- Views: 876
Re: jets sizes
5mm pilot jet, 6mm main.
- Wed Jul 17, 2013 8:38 pm
- Forum: Lambretta Tech
- Topic: Cyclone 5 and Mito Pipe test drive.
- Replies: 15
- Views: 6617
Re: Cyclone 5 and Mito Pipe test drive.
Unfortunately i will not be at the IOW. Don't want to compare your engine, i love the smoothness of mine and the reliability on long runs. From both sides the pipe looks pretty standard, you have to watch under the frame to see the muffler. It is more quiet than a Clubman /Acillotti or a BGM. Just s...
- Tue Jul 16, 2013 9:55 pm
- Forum: Lambretta Tech
- Topic: Will a cyclone version 1 be ok with 25hp tune???
- Replies: 2
- Views: 1629
Re: Will a cyclone version 1 be ok with 25hp tune???
If i remind correctly the V1 was tested on a TS1 with about 25 hp without issues...
- Mon Jul 08, 2013 10:59 pm
- Forum: Lambretta Tech
- Topic: Need New Engine Mounts
- Replies: 15
- Views: 5989
Re: Need New Engine Mounts
Here in Italy we bought them from Valla.
I think that Cam-lam would be the right choose, go on with them i don't know about better ones....
I think that Cam-lam would be the right choose, go on with them i don't know about better ones....
- Mon Jul 08, 2013 10:54 pm
- Forum: Lambretta Tech
- Topic: bgm/mb 225 rt
- Replies: 29
- Views: 13188
Re: bgm/mb 225 rt
RT240 (71x60) no issue when starting from cold or warm. I have a sweetbreath filter and i did a small hole in the bottom with a pipe for draining the excess of fuel during the spitback. The pipe looks always dry, but i just had the hole in the plastic elbow because i had serious problems starting my...
- Mon Jul 08, 2013 10:42 pm
- Forum: Lambretta Tech
- Topic: mbg/mb packing plates head gaskets used on RT kits
- Replies: 3
- Views: 1522
Re: mbg/mb packing plates head gaskets used on RT kits
old rt bought in 2011:
1,5mm base
no head gasket
1,5 mm squish italian sx 200 casing
1,5mm base
no head gasket
1,5 mm squish italian sx 200 casing
- Mon Jul 08, 2013 10:40 pm
- Forum: Lambretta Tech
- Topic: Mito racing oil seal conversion
- Replies: 11
- Views: 5115
Re: Mito racing oil seal conversion
I have this conversion on my TS1, and some friends have it on other engines build from Mito.
Can't compare to previous engine performance because i did some porting too.
Can't compare to previous engine performance because i did some porting too.
- Mon Jul 08, 2013 10:34 pm
- Forum: Lambretta Tech
- Topic: Need New Engine Mounts
- Replies: 15
- Views: 5989
Re: Need New Engine Mounts
Why don't you buy some news Tutto Lambretta ones?
I still think they are the best...
I still think they are the best...
- Fri Jun 28, 2013 5:47 pm
- Forum: Lambretta Tech
- Topic: Ignition system...
- Replies: 14
- Views: 3390
- Fri May 17, 2013 8:30 pm
- Forum: Lambretta Tech
- Topic: Mito Disc Brake
- Replies: 12
- Views: 5089
Re: Mito Disc Brake
Darrell, i've got only dyno comparison between two different stage of tune both with the Jolly fitted not other pipes. Why don't you ask to Matteo the guy of MitoLambretta? The pipe has a great ground clearance and an amazing sound. http://www.youtube.com/watch?v=0oLkBUwEDhI&list=UUQ8IQX1PKs5-D-...