Search found 33 matches
- Wed Apr 29, 2009 5:51 am
- Forum: Lambretta Tech
- Topic: Strange noise coming from the kickstart shaft
- Replies: 12
- Views: 4641
Re: Strange noise coming from the kickstart shaft
i hade to file down the red section:
check as well the shim that is in the picture. there should be no play inbetween casing and shim.- Tue Apr 28, 2009 10:13 pm
- Forum: Lambretta Tech
- Topic: Strange noise coming from the kickstart shaft
- Replies: 12
- Views: 4641
Re: Strange noise coming from the kickstart shaft
had the same problem last week...
the piston bush was too high...arround 1 or 2mm!!!
the piston goes back completly but the bush rubs against the gears.
another thing was, that the bronze bush of the kickstart shaft was not deep enough in it´s seat.
the piston bush was too high...arround 1 or 2mm!!!
the piston goes back completly but the bush rubs against the gears.
another thing was, that the bronze bush of the kickstart shaft was not deep enough in it´s seat.
- Tue Apr 28, 2009 8:22 pm
- Forum: Lambretta Tech
- Topic: Strange noise coming from the kickstart shaft
- Replies: 12
- Views: 4641
Re: Strange noise coming from the kickstart shaft
first check if the kickstart shaft is completly driven in. There should be no play on the inside and outside of the shaft/casing. Maybe use a different shim washer.
Also check the bush/sleeve of the kickstart piston.
...and maybe file down a bit of the sleeve.
hope this helps!
cheers
Rob
Also check the bush/sleeve of the kickstart piston.
...and maybe file down a bit of the sleeve.
hope this helps!
cheers
Rob
- Mon Apr 27, 2009 8:56 pm
- Forum: Show us yer Scoots!!
- Topic: My Scooters
- Replies: 3
- Views: 1968
Re: My Scooters
...and the Vespas:
Hope you like it - Mon Apr 27, 2009 8:55 pm
- Forum: Show us yer Scoots!!
- Topic: My Scooters
- Replies: 3
- Views: 1968
- Mon Apr 27, 2009 5:25 am
- Forum: Lambretta Tech
- Topic: running pathfinders without battery
- Replies: 92
- Views: 27496
Re: running pathfinders without battery
thanks J1MS!
wich bridge rectifier can i use?
wich bridge rectifier can i use?
- Tue Apr 21, 2009 5:19 am
- Forum: Lambretta Tech
- Topic: Rally Glovebox for S3
- Replies: 3
- Views: 1845
Re: Rally Glovebox for S3
thanks for the infos!
cheers
Rob
cheers
Rob
- Mon Apr 20, 2009 9:47 pm
- Forum: Lambretta Tech
- Topic: Rally Glovebox for S3
- Replies: 3
- Views: 1845
Rally Glovebox for S3
Did anyone know how to fix one of these Gloveboxes from resurrection-scooters on a Series 3?
Where i have to drill the holes for the mounting brackets? front legshield?
thanx
Rob
Where i have to drill the holes for the mounting brackets? front legshield?
thanx
Rob
- Sun Apr 05, 2009 2:03 pm
- Forum: Lambretta Tech
- Topic: sil engine won´t start
- Replies: 9
- Views: 2878
Re: sil engine won´t start
i changed the wires and the carb (amal to jetex), sealed the exhaust....and voilà ! WORKS!
thanks!!!
:bouncyeng:
thanks!!!
:bouncyeng:
- Sun Apr 05, 2009 9:09 am
- Forum: Lambretta Tech
- Topic: sil engine won´t start
- Replies: 9
- Views: 2878
Re: sil engine won´t start
yes, i have this brown wire from the strator which i thought is for the red CDI plug. ...but did you had as well a proper spark with the incorrect wiring? then i guess that the correct wiring is: green -->CDI white -->CDI brown --> Regulator yellow -->CDI (into red) Rings are ok, arrow on piston poi...