Scooterotica

operonalan

Meant screws supplied too short !

operonalan

Got a universal mounting bracket for cdi / rectifier but it doesn’t fit frame as hole centres on frame different ( only 2cm apart ) also frame is circular at this point( above rear mudguard ) is supplied area too short ... now I know I can make it fit by drilling new holes in frame or more preferabl...

operonalan

Are the ones mentioned above nylon lined ? Are the lined cables better than conventional ?

operonalan

I had same problem and yes it was the clamp that was bent ....hard to believe because it is thick cast etc but only became apparent when comparing it with spare clamp I had .

operonalan

What improvement in braking do you get from fitting this type of rear brake compared with standard set up .Thanks

operonalan

Just mounted a mirror on my tv 200 utilising the throttle side lever mounting .i.e replacing brake lever pin with mirror mounting pin . Perfect views when stationary and not running but poor at most times when riding due to vibration of mirror . Mounting presently with metal washers but before I ref...

operonalan

Agree with Tj Hooker wires need changing round in rear lamp...also there is no directional light from these bulbs backwards or sideways (they direct light only out of front of bulb) so using one renders your backlight reflector useless...normal 12v filament lamp with polished relector will be seen t...

operonalan

A "small" amount of engine oil is leaking into back hub on my tv200...not enough to be noticable externally on the hub (no oil stains radiating out from hub nut) but sufficient to contaminate the brake shoes over a short period (100 miles or so ) and render brake useless.I`ve changed shoes...

Search found 18 matches

Re: Jet 200 cdi / rectifier mounting bracket

Jet 200 cdi / rectifier mounting bracket

Re: Cable kits

Re: Chrome ring - headset gap

Re: Jockey Boxenstop rear brake

Mirror vibration

Re: led rear bulbs

Lambretta rear hub Oil Seal/leak

Login • Register

Advertising