Search found 74 matches

by RobD
Sun Jul 02, 2017 10:48 pm
Forum: Lambretta Tech
Topic: NK Road v ADS 3
Replies: 35
Views: 18538

Re: NK Road v ADS 3

Also ADS3, haven't had any problems with ground clearance on bends but agree it catches when getting on and off the lifting bench and riding up and down kerbs is to be avoided
by RobD
Wed Jun 28, 2017 12:34 pm
Forum: Lambretta Tech
Topic: NK Road v ADS 3
Replies: 35
Views: 18538

Re: NK Road v ADS 3

Running a gt186 with sx200 15x46 and ads 3 and have seen 72mph gps with more to give with panniers and a bag on back and 13st of me. No rev counter unfortunately so can't tell you what it stops at. Going to go 16x46, pretty sure it will pull it ok
by RobD
Sun Oct 09, 2016 8:34 am
Forum: Lambretta Tech
Topic: rb 250 avanti or normal head
Replies: 19
Views: 5339

Re: rb 250 avanti or normal head

How much are the new af heads? Haven't seen any prices anywhere and can't get through on phone
by RobD
Fri Sep 16, 2016 1:34 am
Forum: Sports Bar
Topic: L.C.G.B.
Replies: 7
Views: 3867

Re: L.C.G.B.

Hi,
It was down from around midday to 3.30pm ish due to a server failure. It was restored to a new server from a backup but unfortunately all posts and IMs between 3am on the 14th Sept and midday on the 15th have been lost.
Cheers,
Rob
by RobD
Tue Feb 02, 2016 6:01 pm
Forum: General Scooter Chat
Topic: Anyone going to meltdown in a van?
Replies: 0
Views: 1413

Anyone going to meltdown in a van?

I need something transporting back to the Shaftesbury, Dorset from scooterist meltdown next weekend. It's 2.5m long and less than 1m in the other two directions and weighs 35kg. I could drive there but already have a flight booked and paid for. Will give you £60 towards fuel if you can help me out. ...
by RobD
Fri Jun 19, 2015 7:31 pm
Forum: Lambretta Tech
Topic: Gt186 carb and exhaust
Replies: 58
Views: 25435

Re: Gt186 carb and exhaust

I initially ran my GT186 on 25 PHBL through drilled airbox with an AF clubman and it was disappointing. I replaced the airbox with a remote filter on an elbow + bit of waste pipe and fitted an ADS3 pipe and it completely transformed it. Will do 75mph GPS loaded up on standard SX200 gearing and cruis...
by RobD
Wed Mar 11, 2015 10:24 am
Forum: Lambretta Tech
Topic: GP rear frame grill hole size needed
Replies: 2
Views: 2006

Re: GP rear frame grill hole size needed

That's great many thanks.
by RobD
Tue Mar 10, 2015 9:02 pm
Forum: Lambretta Tech
Topic: GP rear frame grill hole size needed
Replies: 2
Views: 2006

GP rear frame grill hole size needed

I'm looking for a favour, I need the dimensions of the rear frame grill holes and their distance from the centre line of the frame. My Italian GP has been repaired and that part came from an Indian donor which doesn't have the holes and so need to drill them before painting it. I've found the follow...
by RobD
Mon Feb 16, 2015 6:35 pm
Forum: General Scooter Chat
Topic: advice needed please
Replies: 6
Views: 3884

Re: advice needed please

You can do a HPI on just make and frame number and that would return a reg number if there's a match. You could then put reg number in DVLA site to find out tax / mot status. I did the same on a fire damaged insurance write off I bought to find out reg number as plate had melted.
by RobD
Mon Feb 16, 2015 6:32 pm
Forum: General Scooter Chat
Topic: advice needed please
Replies: 6
Views: 3884

Re: advice needed please

I've had a couple of vegas and a S2 that only had six digit numbers and just said lambretta on the v5 and no model. Probably isn't that rare to have duplicate numbers