Search found 193 matches

by Shipleystevep
Sun Apr 05, 2020 8:05 pm
Forum: Lambretta Tech
Topic: Scooter running on
Replies: 11
Views: 10422

Scooter running on

Hi,
What can cause a scooter to “run on” after you’ve shut the throttle? Takes a good few seconds for the refs to drop when the throttle is closed. Checked for air leaks and all sound. Thought it was the carb but stripped and cleaned. Struggling with this now.
Any ideas?
Cheers
Steve
by Shipleystevep
Fri Apr 03, 2020 9:26 am
Forum: Welcome
Topic: NEWBIE
Replies: 6
Views: 2679

Re: NEWBIE

Oreet,
Great helpful forum this, welcome
by Shipleystevep
Mon Mar 23, 2020 8:35 pm
Forum: Lambretta Tech
Topic: Carb problem
Replies: 3
Views: 1644

Re: Carb problem

Thanks guys, took it off stripped and cleaned thoroughly (again!). All good now, must have been some crap in there.

Cheers steve
by Shipleystevep
Sun Mar 22, 2020 3:32 pm
Forum: Lambretta Tech
Topic: Carb problem
Replies: 3
Views: 1644

Carb problem

Hi guys, Need some help please. Just finished restoring a 61 TV175 series 2, kept it all original except for 12 volt electronic ignition. (Couldn’t get the 4 pole points system working right). Anyway I’m using the original 21mm BS7 carb and it’s not running right. Will start fine (with choke) and ti...
by Shipleystevep
Wed Feb 26, 2020 10:36 pm
Forum: Lambretta Tech
Topic: fork link bushes
Replies: 7
Views: 3082

Re: fork link bushes

Keith Newman (k2 custom classics) does a good spring compressor
by Shipleystevep
Wed Feb 26, 2020 10:33 pm
Forum: Lambretta Tech
Topic: Ignition systems
Replies: 15
Views: 8152

Re: Ignition systems

I’ve had bad experiences with BGM - twice. Cheap Indians ok. Just trying a Scootronicsbut no real experience yet.
All a bit of a lottery I think unless you’re capable of spotting the lemons and correcting yourself.
by Shipleystevep
Mon Feb 24, 2020 12:52 pm
Forum: Lambretta Tech
Topic: Engine Mount Disaster
Replies: 6
Views: 2481

Re: Engine Mount Disaster

Be ok, you should see the state of some casings I’ve swapped mounts on for mates.
by Shipleystevep
Sat Feb 22, 2020 9:52 am
Forum: Welcome
Topic: new member
Replies: 4
Views: 2112

Re: new member

Hi there 👍
by Shipleystevep
Thu Jan 09, 2020 1:15 pm
Forum: Lambretta Tech
Topic: 6 volt points - help please
Replies: 6
Views: 2592

Re: 6 volt points - help please

Was tracking down the inside of the old plug cap, tried a new one and it’s ok.

Many thanks
by Shipleystevep
Tue Jan 07, 2020 10:03 pm
Forum: Lambretta Tech
Topic: 6 volt points - help please
Replies: 6
Views: 2592

Re: 6 volt points - help please

Thanks really appreciate your suggestions and I will follow them but,,,,, I don’t understand why with the plug in the cap out of the cylinder if I touch the body of the plug (hex nut bit) I get a right belt. If I hold that near the frame it sparks there, but if I firmly earth it there (like you do) ...