Search found 214 matches
- Tue Aug 20, 2013 1:00 pm
- Forum: Vespa Tech
- Topic: P2 gearbox in a T5 ???
- Replies: 17
- Views: 4900
Re: P2 gearbox in a T5 ???
With that set up you already have all you need and exactly the right exhaust. The rest is just porting and know how ;) This is the part that bores most guys to tears but in amongst all the degrees, angles and mathematics is where the real power is hiding. If it was mine (or yours!) I would put the 2...
- Tue Aug 20, 2013 5:19 am
- Forum: Vespa Tech
- Topic: P2 gearbox in a T5 ???
- Replies: 17
- Views: 4900
Re: P2 gearbox in a T5 ???
You should get this revving a bit higher in 4th before you up gear. I'll bet it revs over 8000 in third. When you get it to rev as high in 4th, as it does in 3rd then go for the upgear and probably even then I would just fit a P200 65 tooth ring gear with the 22 clutch. Its not what you want to hear...
- Mon Aug 19, 2013 5:31 am
- Forum: Vespa Tech
- Topic: P2 gearbox in a T5 ???
- Replies: 17
- Views: 4900
Re: P2 gearbox in a T5 ???
Just to go back to the beginning for a moment. Is it revving all the way to the redline in 4th?
- Tue Aug 13, 2013 4:55 am
- Forum: Vespa Tech
- Topic: dr180 kit
- Replies: 9
- Views: 6166
Re: dr180 kit
The most important part about fitting the kit is how it fits to yor engine. Most guys just take them out of the box and bolt them on. This is fine and sometimes they are lucky and they go well. Sometimes they dont. Its a bit more work to set up a kit to fit properly and even the DR kit can be surpri...
- Sun Aug 11, 2013 8:46 am
- Forum: Vespa Tech
- Topic: Rally 200 Clutch issues
- Replies: 26
- Views: 5260
Re: Rally 200 Clutch issues
If you ever want to sell it ask here first! :D To test the clutch cable tension is roughtly right. Pull the clutch lever in and press the kickstart. Watch the flywheel and it should not try to move and the kickstart will press down easily. There should be very slight lever slack when it is let out. ...
- Thu Aug 08, 2013 7:11 am
- Forum: Vespa Tech
- Topic: Vespa Tuning Project.....
- Replies: 53
- Views: 19055
Re: Vespa Tuning Project.....
According to speedo which is out in 3rd it pulls about 65 think its more like 60. It goes of clock but gps it said it was doing 80. This i was unsure of so used a diff gps and it said nearly 75. So not to sure. Both gps readings were taken with head down on flat. I had ir dynod a while ag but was u...
- Wed Aug 07, 2013 11:40 am
- Forum: Vespa Tech
- Topic: Vespa Tuning Project.....
- Replies: 53
- Views: 19055
Re: Vespa Tuning Project.....
What speeds does it do in 3rd and 4th and I can work out the rpm. The reason I ask is I'm trying to work out some final tweeking to mine! 
- Tue Aug 06, 2013 12:23 pm
- Forum: Vespa Tech
- Topic: Vespa Tuning Project.....
- Replies: 53
- Views: 19055
Re: Vespa Tuning Project.....
must be a lot of hills where you live! Do you have a standard 210 kit or is it ported? And how many revs does it pull in 4th?
- Tue Aug 06, 2013 8:02 am
- Forum: Vespa Tech
- Topic: Vespa Tuning Project.....
- Replies: 53
- Views: 19055
Re: Vespa Tuning Project.....
22/68 is using a PX125 tree. Do you mean 22/65?LI150 wrote:Are u using standard gearing if yes i take it that it pulls 4th easily. I ask as my 210 uses 22/68 and flys but am interested in what can be done to utilize standard gearing
- Sun Aug 04, 2013 1:27 pm
- Forum: Vespa Tech
- Topic: Vespa Tuning Project.....
- Replies: 53
- Views: 19055
Re: Vespa Tuning Project.....
Looks impressive! Really interested to see how it runs on the road. When you said that you could take it to 192 - 194 Ex duration, have you tried this before on another? And it still pulls the T5 4th ok? You're giving me ideas :idea: Mine is topping out at 8400 rpm and I would like a few hundred rpm...