Scooterotica

belly

Short answer, yes. Will need to profile head and open out for correct compression ratio

belly

I think your problem is the BGM piston has a higher crown than the original Meteor piston. Your head may need machining to match the new piston

belly

you can get the black solid float for the PHBH this should solve your problems with ethanol

belly

Saw this, well deserved

belly

Two long screws

belly

SIP rims, although you do have to change the studs which can be a pain. Hagon rear shock, simple and good value

belly

Halite washers do vary, had one that was too thick, crank wouldn't turn, replaced it with thinner one all OK

belly

Flywheel wont pull it over as crank tightens against drive side bearing. Have you tried piston round tother way to see if bearing cutout is central?

belly

For the electrics best stuff is Isopropyl Alcohol, spray on blow off with airline. Leaves no residue

belly

I was running a copy taffy pipe on my ts230 until recently. Have now fitted an AF NK tour/road pipe, it has transformed the bike. Fitted easy, running 4.7 final drive and it pulls like a train

Search found 35 matches

Re: head reprofiling

Re: Mugello 225 v4 piston

Re: 25mm Dellorto Float melt

Re: my first ever scooter build. cagiva mito 125 engine

Re: Series 2 Rebuild question - front mudguard

Re: Upgrades

Re: Drive side seal retainer

Re: Con rod not sitting central in piston.

Re: Cleaning flywheel and Stator plate

Re: ADS3 or Franspeed Super Tourer.

Login • Register

Advertising