Scooterotica

RBG

You can get that repaired. Localy I don't know.

RBG

jazzyb wrote:scooter restorations

x2

RBG

rocho68 here also, great bit of kit.

RBG

teamv

What the took you to Warton, there is nothing there since I moved.

RBG

I'm looking at doing the same, what width wrap did you guys find works best and what length was used roughly on your franspeed. I've found a shop near me that sells VHT flameproof paint, Black 1" or 2" x 15', 1" or 2" x 50' exhaust wrap plus a High-Temperature Silicone exhaust wr...

RBG

We also got more MPG from petrol rather than this E10 shite we buy at the pumps these days.

RBG

http://scooterbbs.net/board/DCForumID1/14336.html

Picture should give you some idea.

RBG

Thanks for the link.
Looks like a reasonably easy job, there is no case to build up, weld up the 4 holes re-drill and tap and bore out for a 200cc cylinder.

RBG

How easy are they to convert, I have one in the shed that has the room to open out.

Is it something I could get done at a local workshop or is it best to send it to a scooter shop.
Any tips or tricks and the cost?

RBG

I've a late LI 125 gearbox sitting in box I'm thinking of using this in my TT3 motor. A 20/21 tooth front sprocket and a 47 tooth clutch bell will give me a ratio of 4.32 / 4.21 Not decided on the exhaust yet. Anybody any experience with the LI 125 gear box. In my opinion its a good geabox. I have ...

Search found 202 matches

Re: engine block repair

Re: Allstyles Scooters

Re: 6 plate clutch

Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....

Re: exhaust Wrap...

Re: LI 150 Series II tank capacity ...

Re: lock cowl

Re: Late Spanish 150 case to a 200.

Late Spanish 150 case to a 200.

Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....

Login • Register

Advertising