Search found 1254 matches
- Tue Jul 19, 2016 9:59 pm
- Forum: General Scooter Chat
- Topic: Filter glue
- Replies: 4
- Views: 1902
Re: Filter glue
Looks like Gorilla glue does the job
- Mon Jul 18, 2016 7:50 pm
- Forum: General Scooter Chat
- Topic: Filter glue
- Replies: 4
- Views: 1902
Re: Filter glue
Same sort of foam, it's a Ramair that I want to glue to an off centre mouth
- Mon Jul 18, 2016 5:54 pm
- Forum: General Scooter Chat
- Topic: Filter glue
- Replies: 4
- Views: 1902
Filter glue
Can anyone recommend a glue/ resin to stick a foam filter to a rubber mouth? Not Superglue.
- Mon Jul 18, 2016 5:50 pm
- Forum: Lambretta Tech
- Topic: ts1 jetting
- Replies: 6
- Views: 3744
- Mon Jul 18, 2016 5:47 pm
- Forum: Lambretta Tech
- Topic: SIL GP200, TICK OVER NOT RIGHT, SLUGGISH AT TIMES
- Replies: 2
- Views: 1468
Re: SIL GP200, TICK OVER NOT RIGHT, SLUGGISH AT TIMES
Screw the tick over screw in on the throttle arm so the motor is running faster then play with the idle screw on the side to get a nice even beat and settles down straight away after you rev up ,it probably needs to go in a turn or two. Once happy slow the tick over down on the throttle screw.
- Mon Jul 18, 2016 5:39 pm
- Forum: Lambretta Tech
- Topic: Gearing issue
- Replies: 27
- Views: 8112
Re: Gearing issue
Easiest is try a larger rear tyre first.
- Sun Jul 17, 2016 3:32 pm
- Forum: Lambretta Tech
- Topic: erratic tacho reading
- Replies: 2
- Views: 1797
Re: erratic tacho reading
Mines always been erratic on tick over with a Varitronic but fine once moving. The instructions say add a 1k Ohm resistor in series if the readings are false,or try Quadtech for advise.
- Sat Jul 16, 2016 7:31 pm
- Forum: Lambretta Tech
- Topic: mb ts1 touring tune which pipe
- Replies: 2
- Views: 2129
Re: mb ts1 touring tune which pipe
TSR Evo and higher gearing?
- Sat Jul 16, 2016 7:22 pm
- Forum: Lambretta Tech
- Topic: Disappointing RB20.
- Replies: 77
- Views: 21196
Re: Disappointing RB20.
I've just fitted a VHSH30 on an RB20 that is supposed to be jetted to suit from AF's. It has U16 needle DQ267 170 main 60/B48 idles 60 choke 3.0 float valve 50 slide I've not rode it yet but it starts and revs fine although the main seems large plus the jetting is not the same as in the RB instructi...
- Mon Jul 11, 2016 9:50 pm
- Forum: Lambretta Tech
- Topic: RB250 set up.
- Replies: 10
- Views: 6545
Re: RB250 set up.
35 is standard and as said 36 is the short 5 th. What sprockets are you running?