What's an acceptable amount of fuel to flow from a standard tap, in 1 minute, for a 20mm carb on standard 150 engine??
Maybe someone, whose scoot runs fine, would test this for me?
Thanks
Search found 219 matches
- Thu Sep 11, 2014 2:10 pm
- Forum: Lambretta Tech
- Topic: Standard Petrol Tap Flow Rate?
- Replies: 2
- Views: 1378
- Wed Sep 03, 2014 8:42 am
- Forum: Lambretta Tech
- Topic: Fooked Rimini 5 speed.
- Replies: 73
- Views: 17918
Re: Fooked Rimini 5 speed.
I doubt Eddie15b really wants to just keep it in the polystyrene box after forking out so much on it, but agreed it would definitely then last forever if he did!
Anyway, I still think he should go back to Rimini and ask them to comment on his photo!
Anyway, I still think he should go back to Rimini and ask them to comment on his photo!
- Wed Sep 03, 2014 7:39 am
- Forum: Lambretta Tech
- Topic: Fooked Rimini 5 speed.
- Replies: 73
- Views: 17918
Re: Fooked Rimini 5 speed.
below is a photo of my cyclone gearbox http://i1068.photobucket.com/albums/u449/eddie15b2/DSC00744.jpg i put it together like this after reading of other scooterists problems with the version 2 issue the 5th gear cog on the tree and the loose 5th gear are flush (at the top) from this you can see th...
- Wed Sep 03, 2014 7:03 am
- Forum: Lambretta Tech
- Topic: Fooked Rimini 5 speed.
- Replies: 73
- Views: 17918
Re: Fooked Rimini 5 speed.
below is a photo of my cyclone gearbox http://i1068.photobucket.com/albums/u449/eddie15b2/DSC00744.jpg i put it together like this after reading of other scooterists problems with the version 2 issue the 5th gear cog on the tree and the loose 5th gear are flush (at the top) from this you can see th...
- Wed Aug 27, 2014 1:55 pm
- Forum: Lambretta Tech
- Topic: Needle or Atomiser ?
- Replies: 35
- Views: 12957
Re: Needle or Atomiser ?
Hi Tom... good to see your name in the top 3 for Scootering race reports... spot on :) My concern is that we are talking very small, very accurate modifications needed and I'd rather pay someone to get it right/accurate during manufacture, rather than me bugger it up! Adam Thanks Adam and yep fair ...
- Wed Aug 27, 2014 1:41 pm
- Forum: Lambretta Tech
- Topic: Needle or Atomiser ?
- Replies: 35
- Views: 12957
Re: Needle or Atomiser ?
Dellorto sell all sorts of drill bits, reamers and measuring tools
- Wed Aug 06, 2014 8:17 pm
- Forum: Lambretta Tech
- Topic: dellorto vhsb atomisers
- Replies: 10
- Views: 6486
Re: dellorto vhsb atomisers
As Adam suggested, I'd also double check you've got correct pilot/idle jet fitted for your setup. Also, make sure float is shutting off correctly, and choke isn't (slightly) sticking on!
- Wed Aug 06, 2014 4:35 pm
- Forum: Lambretta Tech
- Topic: dellorto vhsb atomisers
- Replies: 10
- Views: 6486
Re: dellorto vhsb atomisers
Is your atomiser/needle brand new, as they can wear out quickly!
- Wed Aug 06, 2014 4:32 pm
- Forum: Lambretta Tech
- Topic: Stator Plate problem
- Replies: 38
- Views: 10953
Stator Plate problem
I replaced my Varitronic stator - after approx. 3 thousand miles - despite it giving good readings, and that did the trick. Have you strobed yours, as mine as jumping about all over the place - once you gave it some revs - steady at tickover and max revs - but new stator cured this. Other than that,...
- Sun Aug 03, 2014 2:10 pm
- Forum: Lambretta Tech
- Topic: Stator Plate problem
- Replies: 38
- Views: 10953
Re: Stator Plate problem
Hi,
I know this was a while ago, but just wondered if you worked out what the problem was, as I have a very similar problem with the Varitronic on my Super Monza
I'll try another stator plate, but good to know if there was anything else causing the symptons you mentioned??
Cheers
I know this was a while ago, but just wondered if you worked out what the problem was, as I have a very similar problem with the Varitronic on my Super Monza
I'll try another stator plate, but good to know if there was anything else causing the symptons you mentioned??
Cheers