Scooterotica

Muppet

your scoot fits in a van no padlock will keep it safe; a tracker and alarm are the best things

Muppet

i agree would be nice to have a chance to edit posts a few minutes after posting

Muppet

changing the shape of the leading edge of the port might reduce noise levels

Muppet

a small bladed long flat screwdriver in one of the holes nearest one of the ends of the wire circlip; push against the clip through the hole just enough to get another thin bladed screwdriver in from the outside between the clip and the disc; once you’ve got that far you can lever the clip out

Muppet

Remove the plug cap and look for a spark from the end of the ht lead; cut the end of the lead and hold the end of the ht lead about 5mm from the engine while you or someone else kicks the engine if it jumps 5mm and ya spark is blue your good to go

Muppet

can be done; fitted them to three series 1s you have to move the horn it easily fits the gap between frame and horn cast

Muppet

so many new kits available some of the new kits not getting much posted on here or the other forums but its on facebook

Muppet

cylinder head reprofile best cut on a lathe combustion chamber shape and volume use a dremel or better a die grinder wirh large tungsten finish with flap wheel

Muppet

Adam_Winstone wrote: ↑Wed Oct 30, 2019 7:02 pm My experience of them has always been good so I'm surprised to hear that people have had issue. Hopefully they are still trading and will address any problems.

Adam

+1

Muppet

EP = extreme pressure if you use it your clutch will slip

Search found 1282 matches

Re: Padlocking Back Brake Pedal

Re: No editing allowed ?

Re: Adapting a 42mm Clubman exhaust.

Re: Getting steel ring out of break disk

Re: 6 volt points - help please

Re: S1 Hidden Master Cylinder - Where & How

Re: What is wrong with people?

Re: 225 Cylinder Head Profiling

Re: Glasgow Lambretta

Re: Lambretta Gear Oil

Login • Register

Advertising