Search found 17 matches
- Thu May 31, 2018 5:24 pm
- Forum: Vespa Tech
- Topic: Pros and cons of a 22 tooth primary on a kitted P125?
- Replies: 7
- Views: 6274
Re: Pros and cons of a 22 tooth primary on a kitted P125?
I'm also presently building a "quick" engine using a Polini pipe, cut crank, malossi 166 with the casings matched, and a 24mm carb. Was a bit miffed about gearing but finally opted for a 22/68 primary through a late model 150 gearbox. Going for nippy round town use as opposed to motorway c...
- Thu May 31, 2018 3:51 pm
- Forum: Show us yer Scoots!!
- Topic: Fire Vespa
- Replies: 7
- Views: 5349
Re: Fire Vespa
any updates on this ??
- Fri May 25, 2018 5:06 pm
- Forum: Vespa Tech
- Topic: Fitting a 130 rear tyre
- Replies: 4
- Views: 2663
Fitting a 130 rear tyre
I want to fit a 130 rear tyre on my cutdown. I have seen the spacer kits sold on the SIP website, and for what's involved I'm sure I could make my own. Initially I plan to use the 2 wide halves' of a set of Vespa rims with a 130/70-10 tyre. I know that the right hand side of the swing arm of the eng...
- Wed Nov 16, 2016 2:32 pm
- Forum: Vespa Tech
- Topic: Engine rebuild
- Replies: 4
- Views: 2871
Re: Engine rebuild
Do it yourself its not that hard and will be very rewarding - also save yourself about 250 quid.
- Wed Nov 16, 2016 2:25 pm
- Forum: Vespa Tech
- Topic: kickstart issues destroyed the casing
- Replies: 4
- Views: 3095
Re: kickstart issues destroyed the casing
Well done on getting the cases welded and having it back up and running! The kickstart thing has never happened to me or anyone I've known but I wonder did you find any debris in the front part of the gearbox above the white plastic piece that's just a push in fit? I've wrecked a cosa clutch in the...
- Fri Nov 11, 2016 7:09 am
- Forum: Vespa Tech
- Topic: kickstart issues destroyed the casing
- Replies: 4
- Views: 3095
Re: kickstart issues destroyed the casing
Could you have inadvertently fitted a Smallframe kickstart cog as the engagement teeth face the opposite way to a P range? This may explain the noise on initial start up which would then cause friction and weld it to the tree. When the quadrant is in the rest position it allows the cog to freewheel...
- Sat Nov 05, 2016 12:02 pm
- Forum: Vespa Tech
- Topic: kickstart issues destroyed the casing
- Replies: 4
- Views: 3095
kickstart issues destroyed the casing
I have just finished meticulously building myself a monster malossi MHR 221 engine. It really was an exercise in OCD I built the whole engine with the best bits available and spent ages tuning, porting, pre jetting the carb, and setting the ignition timing before fitting it into the frame and starti...