The Monza kit is similar to the TS1 but has smaller transfers, if tuned can produce good results, they deliver smoother power delivery (in my opinion), i run a heavily modified kit on a 62x110 crank and gives around 28bhp.
Good luck with the build
Search found 102 matches
- Thu Oct 06, 2016 11:20 pm
- Forum: Lambretta Tech
- Topic: Nk rally exhaust jetting
- Replies: 4
- Views: 2647
- Thu Oct 06, 2016 7:38 pm
- Forum: Lambretta Tech
- Topic: Nk rally exhaust jetting
- Replies: 4
- Views: 2647
Re: Nk rally exhaust jetting
The Monza can be temperamental on a PHBH, i have a couple and the best results have been 55 pilot, X2 needle, AV266 atomiser, the slide is the usual issue off idle, it needs to be quite lean, either 45 or even 50 (you can do this yourself with a dremmel and a steady hand. The TMX carbs work very wel...
- Sat Oct 01, 2016 11:53 am
- Forum: Vespa Tech
- Topic: Small frame Clutch
- Replies: 2
- Views: 1505
Small frame Clutch
Does anyone have experience/recommendations for a good small frame clutch on a tuned motor.
Building a Polini EVO running which should be aprx 18-20bhp (7500-8k revs)
I have the FA 6 spring unit, SIP do a race set of carbon plates and springs (green), no rating on what this will take.
Cheers
Building a Polini EVO running which should be aprx 18-20bhp (7500-8k revs)
I have the FA 6 spring unit, SIP do a race set of carbon plates and springs (green), no rating on what this will take.
Cheers
- Fri Sep 16, 2016 6:30 pm
- Forum: Lambretta Tech
- Topic: R1/R6 shocker?
- Replies: 7
- Views: 3394
Re: R1/R6 shocker?
http://www.lambrettaupgrades.co.uk/apps ... e/products
Stocks the correct springs (i use 180lb) plus all the bushes etc......
Stocks the correct springs (i use 180lb) plus all the bushes etc......
- Wed Sep 14, 2016 6:20 pm
- Forum: Lambretta Tech
- Topic: R1/R6 shocker?
- Replies: 7
- Views: 3394
Re: R1/R6 shocker?
Afternoon folk, I am looking at buying a R1/R6 rear shocker, whats the difference between the two? Was it just a rebranding or are they differeent in size, shape etc? thanks scott Hi Scott, the R6 is slightly shorter at 295mm, ideal if you need more frame clearance on a reed motor, only go for the ...
- Sun Sep 11, 2016 2:01 pm
- Forum: Paint & Bodywork Tech
- Topic: Graphics Kits
- Replies: 0
- Views: 1543
Graphics Kits
Does anyone know of an off the shelf graphic supplier now scoot graphics have closed?
Cheers
Cheers
- Thu Jun 30, 2016 8:20 pm
- Forum: Vespa Tech
- Topic: Smallframe Exhausts
- Replies: 0
- Views: 992
Smallframe Exhausts
Has anyone had experience with the SSC curly system or the Simonise Evo on a tuned small frame (136 ported and matched, jazz crank etc..)
Cheers
Cheers
- Tue May 17, 2016 1:20 pm
- Forum: Paint & Bodywork Tech
- Topic: Paint quantity for a smallframe
- Replies: 4
- Views: 2843
Re: Paint quantity for a smallframe
First attempt!
- Tue May 17, 2016 12:28 pm
- Forum: Paint & Bodywork Tech
- Topic: Paint quantity for a smallframe
- Replies: 4
- Views: 2843
Paint quantity for a smallframe
As title, would 1 litre be suufficient? (Cellulose)
- Sun May 08, 2016 8:01 pm
- Forum: Lambretta Tech
- Topic: Ts1-225, TMX35, SuperTourer. Jetting?
- Replies: 8
- Views: 3821
Re: Ts1-225, TMX35, SuperTourer. Jetting?
Hi, as a starting point
20.5 pilot
en56 needle, second clip
Main jet 310
20.5 pilot
en56 needle, second clip
Main jet 310