Really interested in seeing this go.Anything that would pass the Spanish MOT and hopefully cost effective.
Always like to see standard stuff reused.
Search found 42 matches
- Thu Mar 06, 2014 8:14 pm
- Forum: Vespa Tech
- Topic: O-tuning Olivier's px200
- Replies: 39
- Views: 19415
- Mon Feb 17, 2014 7:03 pm
- Forum: Vespa Tech
- Topic: Sealing pad repair kit (LML reedvalve)
- Replies: 6
- Views: 3744
Re: Sealing pad repair kit (LML reedvalve)
I made my own - just looked at the ones on SIP, SCK and Beedspeed got one of the lml reedvalves and reduced the height then made a spacer block for it to sit in I`ve never got round to trying but cant see why it wont work cant post photos but if you pm your email I will send you some - have a look ...
- Mon Feb 17, 2014 7:01 pm
- Forum: Vespa Tech
- Topic: Sealing pad repair kit (LML reedvalve)
- Replies: 6
- Views: 3744
Re: Sealing pad repair kit (LML reedvalve)
[quote="Muttley McLadd"]Aren't they about six quid on ebay? Yes these but they sit inside a CNC machined box if you like which fits between the crankcase and carb box.The mounting plate is where the work is. But you arew correct the conversion is based on LML reedvalves are fitted and used...
- Sun Feb 16, 2014 8:45 pm
- Forum: Show us yer Scoots!!
- Topic: Winter Model, Summer Restoration...
- Replies: 141
- Views: 52566
Re: Winter Model, Summer Restoration...
Lovely.Just love series 2 Eibars.
- Sun Feb 16, 2014 8:27 pm
- Forum: Lambretta Tech
- Topic: Clutch again !!!!!!!!!!!
- Replies: 3
- Views: 1368
Re: Clutch again !!!!!!!!!!!
Ok Cheers lads.will have a look tomorrow,
- Sun Feb 16, 2014 6:56 pm
- Forum: Lambretta Tech
- Topic: Clutch again !!!!!!!!!!!
- Replies: 3
- Views: 1368
Clutch again !!!!!!!!!!!
Got a friends TV175 with a Muggello kit fitted and last week asked me to have a look at the clutch and a give it a good service. All was well but the rear sprocket was worn and clutch was slipping no problem so i thought. So fitted a SIL rear sprocket and bushes new plates oil and gasket come and an...
- Sun Feb 16, 2014 6:45 pm
- Forum: Vespa Tech
- Topic: Sealing pad repair kit (LML reedvalve)
- Replies: 6
- Views: 3744
Sealing pad repair kit (LML reedvalve)
Like a lot of Vespa riders im sure youve all got of a plie of buggered P200 casing in the garage that had sucked something down the inlet normally the tickover screw. Anyhow a Uk & German dealer sells a repair kit using a cutdown LML reedvalves for 160 pounds 180 euro.Which seems a bit steep too...
- Thu Sep 05, 2013 11:37 pm
- Forum: Lambretta Tech
- Topic: Is 24mm to big?
- Replies: 4
- Views: 2492
Re: Is 24mm to big?
Thanks again to you both.
- Thu Sep 05, 2013 11:15 pm
- Forum: Lambretta Tech
- Topic: Is 24mm to big?
- Replies: 4
- Views: 2492
Re: Is 24mm to big?
Thanks a lot will have a look tomorrow.
- Thu Sep 05, 2013 7:16 pm
- Forum: Lambretta Tech
- Topic: Is 24mm to big?
- Replies: 4
- Views: 2492
Is 24mm to big?
Have a customers scoot standard Innocenti SX150 in the workshop at the moment. Was running really badly with a 22mm Jetex. Cylinder is standard. Had a brand new OKO/Kelkin PWK 24mm on the shelf so fitted this as well as a Clubman pipe to replace damaged original. Using ScootsRS froum have jetted wit...