Search found 134 matches
- Mon Jun 11, 2018 10:40 pm
- Forum: General Scooter Chat
- Topic: Flat spot when warm
- Replies: 0
- Views: 1787
Flat spot when warm
Have come across a couple of issues with vespa pxs with a flat spot on the rev but only once warmed up.... a bit baffled as to why? Haven't looked at wither of them yet but just wondering if anyone has come across and solved this.... to save me some time!
- Tue Apr 10, 2018 1:02 pm
- Forum: Tech FAQ
- Topic: readspeed 6 plate......
- Replies: 12
- Views: 7143
Re: readspeed 6 plate......
Studs, I think Shayne's s type TS1 has a Readspeed 6 plate in it. Now it hasn't been used that much but when I had the motor in my GP it was good, I'm sure I read on here that people had put decent miles on them with no issues but that was maybe 5/6 years ago.
- Tue Mar 13, 2018 10:02 am
- Forum: Carburettor Set-ups
- Topic: PHBL 'D' needles
- Replies: 4
- Views: 7241
PHBL 'D' needles
Is there a commonly used range of D needles with an easy guide for lean to rich - like is available for the PHBH carb i.e X12 - X7 - X13 - X2 - X25 ?
I'm sitting too rich on a D29 on the top clip so don't know where to go - and I don't really understand the charts showing diameters and tapers lol.
I'm sitting too rich on a D29 on the top clip so don't know where to go - and I don't really understand the charts showing diameters and tapers lol.
- Thu Feb 01, 2018 5:14 pm
- Forum: Lambretta Tech
- Topic: Jet 200 petrol tanks
- Replies: 5
- Views: 2360
Jet 200 petrol tanks
As in the plastic ones, are they no more? Can't seem to see anywhere selling them.
- Tue Jul 25, 2017 5:46 pm
- Forum: Lambretta Tech
- Topic: BGM non adjustable dampers
- Replies: 5
- Views: 2330
Re: BGM non adjustable dampers
Damper holes are 235mm centre to centre.
- Tue Jul 25, 2017 5:38 pm
- Forum: Lambretta Tech
- Topic: BGM non adjustable dampers
- Replies: 5
- Views: 2330
Re: BGM non adjustable dampers
Distance is 248mm
Yeah when on the stand they would be at full extension being forced apart by the springs.
Yeah when on the stand they would be at full extension being forced apart by the springs.
- Tue Jul 25, 2017 3:01 pm
- Forum: Lambretta Tech
- Topic: BGM non adjustable dampers
- Replies: 5
- Views: 2330
Re: BGM non adjustable dampers
I'll check when I get home.
- Tue Jul 25, 2017 2:10 pm
- Forum: Lambretta Tech
- Topic: BGM non adjustable dampers
- Replies: 5
- Views: 2330
BGM non adjustable dampers
Bough a set of these for my GP and they seem to be about 10mm too short when fully extended and the front wheel is off the ground - To fit I need to get someone slightly heavier than me to sit on the scooter. They are indian forks with, I assume, factory fitted brackets. Any thoughts? Do I fit them ...
- Wed Jun 28, 2017 12:00 am
- Forum: Show us yer Scoots!!
- Topic: NOS TS1
- Replies: 80
- Views: 45399
Re: NOS TS1
Love this project. Where did you get the microphone mesh?
- Tue Jun 27, 2017 11:52 pm
- Forum: General Scooter Chat
- Topic: Lambretta dampers
- Replies: 4
- Views: 2141
Lambretta dampers
Anything decent looking out there apart from BGM? They do look good but for all the difference front dampers make they are far too expensive imo...