Scooterotica

tony

On the results which one is riding that bike dan? Lauro Caforio won by the look of it.

tony

tony

Love it. I will get some pics of matteo's Tm barrelled motor up.

tony

Are you using cork plates ?

tony

Wax, I am sure I saw a diagram where you linked two circuits and kept it all working except for the town/sidelight circuit which then remained on with the headlights. I can't find it anywhere. If you have a spare switch I wouldn't mind having another look?

tony

To add the extra area you may need to be clever or weld around the studs Darrel. But at least that means you may be able to use a pipe that us available keeping costs down on the custom pipe front.
There is no plug and play solution tbh

tony

The circuits overlap on the standard gs key switch. This is what causes the problem.

tony

I think oz's conversion was a top job in terms of engineering. I was not slagging it off on this thread. I never even mentioned it. I was talking about port area and what can be had for the cost. Darrel Taylor who is currently winning group 6 feels that 25 to 30 is available from the 172 malossi. An...

tony

I watched. And very impressed. Well done to both of you.

tony

I find it interesting that the boost is lower than than the main or secondaries.. this means the pipe is working and they are using the boost as a boost and not a transfer port as such. The main draw as it should be is through the mains. So.. as the mains tend to mix so much better you get a better ...

Search found 755 matches

Re: 40+bhp 150cc Vespa Small Frame........

Re: 40+bhp 150cc Vespa Small Frame........

Re: 40+bhp 150cc Vespa Small Frame........

Re: clutch problem

Re: Wiring up a GS Ignition Switch.

Re: sip long stroke t5 crank

Re: Wiring up a GS Ignition Switch.

Re: who would build the following t5/ts1 conversion

Re: darley moor lap record broken twice

Re: who would build the following t5/ts1 conversion

Login • Register

Advertising