, seals, circlip, the lot.Wasn't today, was about 15 years ago.
Search found 465 matches
- Fri Feb 06, 2015 12:37 am
- Forum: General Scooter Chat
- Topic: And todays cockup is !???
- Replies: 104
- Views: 35646
Re: And todays cockup is !???
Installed the same wrong bearing in a mag flange twice , seals, circlip, the lot.
Wasn't today, was about 15 years ago.
, seals, circlip, the lot.Wasn't today, was about 15 years ago.
- Thu Feb 05, 2015 10:48 pm
- Forum: Lambretta Tech
- Topic: drive side plate screw HELP
- Replies: 20
- Views: 5837
Re: drive side plate screw HELP
Understood Grumps, but it is a lot easier and more cost efficient to stick a imact driver in there and wack it with a hammer then spend time standing in front of a case burning gas to heat the thing up...even when you include the time it takes to dot punch when putting it together. Prolly why Innoce...
- Thu Feb 05, 2015 2:59 pm
- Forum: Lambretta Tech
- Topic: Horn cast tap
- Replies: 10
- Views: 2970
Re: Horn cast tap
Of course. And ear muffs and leather gloves with a safetly bloke watching to make sure it is all done to code 
- Thu Feb 05, 2015 2:57 pm
- Forum: Lambretta Tech
- Topic: lambretta rear hub nut massive mystery.
- Replies: 12
- Views: 4958
- Thu Feb 05, 2015 2:53 pm
- Forum: Lambretta Tech
- Topic: drive side plate screw HELP
- Replies: 20
- Views: 5837
Re: drive side plate screw HELP
Exactly why allen heads are terrible for this application. If welding a nut on won't do it, try drilling drill it in the center, tap it, stick a double nutted bolt in there, heat lube and try getting the bugger out. Grumps is on it on taking it to a machinist . Although saying that, the one I did ta...
- Thu Feb 05, 2015 2:46 pm
- Forum: Lambretta Tech
- Topic: Horn cast tap
- Replies: 10
- Views: 2970
Re: Horn cast tap
If you've a compressor handy, just blow it out as you're going along, saves buying a new tap.
- Thu Feb 05, 2015 2:44 pm
- Forum: Lambretta Tech
- Topic: Here we go again! Kickstart piston with pictures!
- Replies: 29
- Views: 8395
Re: Here we go again! Kickstart piston with pictures!
What about a stronger spring?
Have had a few Serveta's in where they had used the same spring(selector) for both selector and piston from the factory. Piston won't be pressed onto gear with enough pressure and hey presto! slippage and wear.
Have had a few Serveta's in where they had used the same spring(selector) for both selector and piston from the factory. Piston won't be pressed onto gear with enough pressure and hey presto! slippage and wear.
- Thu Feb 05, 2015 2:37 pm
- Forum: General Scooter Chat
- Topic: TOP TIPS
- Replies: 11
- Views: 4822
Re: TOP TIPS
...or lumpy snow that is brown on the inside 
- Wed Dec 24, 2014 3:05 am
- Forum: Vespa Tech
- Topic: Shouldn't have done it!
- Replies: 10
- Views: 3528
Re: Shouldn't have done it!
Job done, happy customer, happy scoot.
Let Xmas begin
Let Xmas begin
- Sun Dec 21, 2014 9:24 pm
- Forum: Vespa Tech
- Topic: Shouldn't have done it!
- Replies: 10
- Views: 3528
Shouldn't have done it!
Man phones up and wants to bring scoot in. Not running quite right. Sure, bring it in, says me. Up turns a lovely red Vespa. With chrome and a black piece of trim round the tank. OH SHIP, a Nammer :cry: Not only that, the man wants a Malossi 166 and a long stroke crank. Rip it apart expecting the wo...