Search found 141 matches

by scootRS.com
Tue Nov 24, 2009 10:54 am
Forum: Lambretta Tech
Topic: scootrs anti dive upgrade kit
Replies: 24
Views: 8944

Re: scootrs anti dive upgrade kit

We have no system to automate extra emails afterward, and much better to have a single up-to-date tutorial. Some would miss the other email anyway ;-) It's explained on the help page if people miss it.

There's no problem fitting the anti-dive. Just a matter of swapping some items.
by scootRS.com
Tue Nov 24, 2009 8:05 am
Forum: Lambretta Tech
Topic: scootrs anti dive upgrade kit
Replies: 24
Views: 8944

Re: scootrs anti dive upgrade kit

See your order email or the help page about instructions :D
by scootRS.com
Tue Nov 24, 2009 7:49 am
Forum: Lambretta Tech
Topic: tubeless tyre fitting in west london heathrow area
Replies: 9
Views: 2254

Re: tubeless tyre fitting in west london heathrow area

You don't need to change the valves at all. You can just as easily get a random one from elsewhere that has a problem.

The lcgb has a sticky with a list of shops that mounted tires on these.
by scootRS.com
Wed Nov 18, 2009 4:49 am
Forum: Lambretta Tech
Topic: hydraulic master cylinder on series 2 head set
Replies: 3
Views: 1690

Re: hydraulic master cylinder on series 2 head set

LTH does, don't they? Did you ask them? What MC do you have? If you have one from them it will likely be cut a certain way so you need the matching mount cut the same way. Unless it is not modified at all yet? If you have a Nissin type MC (or Chinese copy), you can get one of our supports or even a ...
by scootRS.com
Sat Nov 14, 2009 11:23 am
Forum: Lambretta Tech
Topic: lammy hidraulic disc brake convrsion without bleed nipple
Replies: 3
Views: 1371

Re: lammy hidraulic disc brake convrsion without bleed nipple

To bleed via the banjo bolt, do as someone commented: "loosen the banjo bolt just enough so that fluid and air could be expelled when the lever was pulled then tighten the banjo a little before releasing the lever. Then pump the lever a couple of times. Repeat this process till pressure is felt...
by scootRS.com
Fri Nov 13, 2009 6:02 pm
Forum: Lambretta Tech
Topic: Stering outboard disk
Replies: 17
Views: 4012

Re: Stering outboard disk

It's not going to affect us, but I think he'd be pissed off to find out later he was only getting a rough sand cast "Sterling" copy that has cracked on others. The MC mounts aren't nearly as nice either. No stainless hose either. No anti-dive either. Etc. Make an informed decision as to wh...
by scootRS.com
Sat Oct 31, 2009 5:01 am
Forum: Lambretta Tech
Topic: ScootRS stamped side panels--Direct experience
Replies: 24
Views: 7365

Re: ScootRS stamped side panels--Direct experience

I posted a photo in the other thread where they seemed fine so, if ever a problem like this, just got to http://scootrs.com/help.cfm and the Returns / Problems / Refunds section and send in the info requested there to get help.
by scootRS.com
Fri Oct 30, 2009 5:50 am
Forum: Lambretta Tech
Topic: scoot rs inboard disc
Replies: 6
Views: 1546

Re: scoot rs inboard disc

Mr. Vaginaspeed, check out the standard scoots forum thread, as various comments from other people there, raw photos, etc. You can add the hyd conversion for them too, if wanting more braking power. No mods needed. Kevo, the hyd. disc wouldn't pull to the right on hard braking unless misaligned or l...
by scootRS.com
Wed Oct 28, 2009 5:21 pm
Forum: Lambretta Tech
Topic: Any one got experience with ScootRS body panels ?
Replies: 37
Views: 9489

Re: Any one got experience with ScootRS body panels ?

>>I was sick and tired of your continuous, never-ending ranting at me in private Read: a quick 2-line note asking nicely to please not link us to companies we have nothing to do with, then getting back insults, clairvoyance and demands to explain what other companies do - which continues in the new ...
by scootRS.com
Wed Oct 28, 2009 7:01 am
Forum: Lambretta Tech
Topic: Any one got experience with ScootRS body panels ?
Replies: 37
Views: 9489

Re: Any one got experience with ScootRS body panels ?

The one LCGB admin's inability to be honest with people on several occasions now about private conversations is what doesn't suit my taste. How anyone can pretend to judge with a big thumb on the scale is beyond me. As he was told and any reasonable person understands, we don't know what all other c...