Search found 650 matches
- Thu Apr 30, 2020 8:23 am
- Forum: Lambretta Tech
- Topic: Anyone try 3D printing this hard to find part?
- Replies: 5
- Views: 3561
Re: Anyone try 3D printing this hard to find part?
Late here but I have one of those boxes off of an early serveta. I think 3D printing might be a little weak since it's normally made out of plastic. The switch is super common but I know what you mean, the box is hard to find.
- Wed Apr 22, 2020 11:30 pm
- Forum: Lambretta Tech
- Topic: RB20 fit
- Replies: 13
- Views: 8662
Re: RB20 fit
same here i used the standard studs from rayspeed as original 7.3mm thick rolled steel studs That's good to know but riddle me this, previous cylinder fit without issue on the same MB studs. I've been diving in and measuring every spot where it might bind and am coming up with matching numbers betw...
- Sun Apr 19, 2020 3:31 pm
- Forum: Lambretta Tech
- Topic: RB20 fit
- Replies: 13
- Views: 8662
Re: RB20 fit
Thanks for the input. It’s crazy that on one kit there’s no problem but there is on the other with the same studs. I’ll see about finding some scootopia studs and at least start there.
Thanks
Thanks
- Sun Apr 19, 2020 3:19 am
- Forum: Lambretta Tech
- Topic: RB20 fit
- Replies: 13
- Views: 8662
RB20 fit
Replaced my RB20 cylinder after my crank rod exploded and the new cylinder is having a hard time sitting all the way home on the case. I’m doing the initial dry build to set the port timings with the new 115/60 cranks. It looks like the upper kick side stud hole might be a hair off where it should b...
- Mon Apr 06, 2020 12:32 am
- Forum: General Scooter Chat
- Topic: The Single Most Important Tuning Benefit
- Replies: 4
- Views: 4987
Re: The Single Most Important Tuning Benefit
Take all those mirrors, horns and crash bars off and it will really go.
- Fri Feb 28, 2020 1:50 am
- Forum: Lambretta Tech
- Topic: Ignition systems
- Replies: 15
- Views: 8074
Re: Ignition systems
I haven't set up a Vape yet but will soon. Very few problems with any that you've listed. Most problems I've found were from user error in install due to poor grounds and bad crimps on the connectors. Be interesting to know your opinion on the vape one. The scootronics one is an option as not heard...
- Thu Feb 27, 2020 12:18 am
- Forum: Lambretta Tech
- Topic: Ignition systems
- Replies: 15
- Views: 8074
Re: Ignition systems
I haven't set up a Vape yet but will soon.
Very few problems with any that you've listed. Most problems I've found were from user error in install due to poor grounds and bad crimps on the connectors.
Very few problems with any that you've listed. Most problems I've found were from user error in install due to poor grounds and bad crimps on the connectors.
- Tue Feb 11, 2020 9:09 pm
- Forum: Lambretta Tech
- Topic: Veglia Speedo
- Replies: 2
- Views: 1671
Re: Veglia Speedo
I believe those are for calibrating the speedometer.
- Fri Jan 17, 2020 8:45 am
- Forum: Standard Scoots & Restorations
- Topic: Stainless or plated fixings?
- Replies: 6
- Views: 5167
Re: Stainless or plated fixings?
Yes always lube stainless. SS has a high friction value and it’s always good to put anti seize on dissimilar metals (and similar). There is a great paper floating around the Internet on mechanical fasteners written by NASA. It goes in to detail on all types of metal fasteners and why they are good/b...
- Thu Jan 16, 2020 3:29 am
- Forum: Standard Scoots & Restorations
- Topic: Stainless or plated fixings?
- Replies: 6
- Views: 5167
Re: Stainless or plated fixings?
Yep, all or nothing.Doom Patrol wrote: ↑Wed Jan 15, 2020 11:34 pm Hmmm... I have used stainless in the past for certain items where it would seem to make sense. But I've never gone overboard for it to the extent that I would fit out an entire scooter with it. Maybe that's the key.