you can drill those out and tap to M8, keeping the drill straight, not a lot of room to wander off course
[and then you may need to enlarge the holes on the side casing of course]
Search found 1226 matches
- Sun Oct 12, 2014 2:52 pm
- Forum: Lambretta Tech
- Topic: series 1 / exhaust mounting
- Replies: 22
- Views: 5517
- Wed Oct 01, 2014 5:02 pm
- Forum: Lambretta Tech
- Topic: clutch top plate and kickstart shaft problems
- Replies: 13
- Views: 5923
Re: clutch top plate and kickstart shaft problems
and it's useful to coat the kickstart shaft and clutch top plate with engineers blue before reassembly. then if there is any rubbing you can see exactly where to remove some metal but don't be tempted to take too much from the kickstart shaft, as they can break there, and it's always the ones that h...
- Tue Aug 12, 2014 9:24 pm
- Forum: Lambretta Tech
- Topic: Catalux rear light
- Replies: 8
- Views: 4345
Re: Catalux rear light
that's a "Lucas" type Martin
I thought they looked ok, until I saw one for real.
Sef, LD catalux lights are loads cheaper, but also a little smaller...
I thought they looked ok, until I saw one for real.
Sef, LD catalux lights are loads cheaper, but also a little smaller...
- Fri Aug 08, 2014 11:46 pm
- Forum: Lambretta Tech
- Topic: Powerjet on Dellorto PHBL 25
- Replies: 12
- Views: 4196
Re: Powerjet on Dellorto PHBL 25
try a weaker slide before fitting a powerjet...
- Sun Jul 06, 2014 6:09 pm
- Forum: Show us yer Scoots!!
- Topic: Group 4 on the road
- Replies: 6
- Views: 3215
Re: Group 4 on the road
Looking forward to seeing it finished Jarv. cheers Robert, ready for mot now... wanted to fit a grille, but had to make some spacers as bolts oversize, looks the part imo https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10312750_431846666956952_1788318754813420394_n.jpg as does the Amal on a...
- Thu Jun 26, 2014 9:41 pm
- Forum: Show us yer Scoots!!
- Topic: Group 4 on the road
- Replies: 6
- Views: 3215
Re: Group 4 on the road
scooterslag wrote: rustoration race chic
put a few bits together this evening...
- Thu Jun 26, 2014 8:34 pm
- Forum: Show us yer Scoots!!
- Topic: Group 4 on the road
- Replies: 6
- Views: 3215
Group 4 on the road
finally caught up a bit in the workshop this week [ and will get to those parts for anyone patient enough to still be waiting ], so thought I would get this 1971 GP together for myself. https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10404153_427159907425628_1705858826480640336_n.jpg I...
- Mon Jun 02, 2014 11:36 pm
- Forum: Lambretta Tech
- Topic: positive stop method
- Replies: 8
- Views: 2897
Re: positive stop method
the end of the tool would well away from the squish band...
I'd change that pickup
I'd change that pickup
- Mon Jun 02, 2014 8:38 pm
- Forum: Lambretta Tech
- Topic: positive stop method
- Replies: 8
- Views: 2897
Re: positive stop method
the further in, the less distance to measure betweeen the two points.
just make sure that the piston is not around TDC, you don't want to be winding the end of the tool into the crown...
just make sure that the piston is not around TDC, you don't want to be winding the end of the tool into the crown...
- Thu May 22, 2014 12:18 am
- Forum: Lambretta Tech
- Topic: Wiring Hoo Ha
- Replies: 53
- Views: 13125
Re: Wiring Hoo Ha
take a picture of the switch, if it's ScootRS generic type I can tell you what the continuity results should be
but it could be that the ignition is fooked, and you are fighting against the unknown...
[and I will reply to your pm from last week ]
but it could be that the ignition is fooked, and you are fighting against the unknown...
[and I will reply to your pm from last week ]