Search found 116 matches

by muffster
Mon Jul 23, 2012 12:20 pm
Forum: Lambretta Tech
Topic: S3 ignition switch
Replies: 13
Views: 7934

Re: S3 ignition switch

Ok i'm back again! I got a honda switch to put in and it's a lot more straight forward than i thought. However, the body of the switch is square and of course the inside of the headst it curved. Which means that the switch doesn't fit inside the hole properly. There is a small keyway on the aperture...
by muffster
Fri Jul 13, 2012 8:42 pm
Forum: Lambretta Tech
Topic: S3 ignition switch
Replies: 13
Views: 7934

Re: S3 ignition switch

Hello again mate.
i will order one of those from Justlambretta.
Are you able to send me some info on how to wire it up?

Many thanks.
by muffster
Wed Jul 11, 2012 9:25 pm
Forum: Lambretta Tech
Topic: S3 ignition switch
Replies: 13
Views: 7934

Re: S3 ignition switch

Profile updated!!

I want a decent switch to replace the cut out and for some security.

I can't find the switches on the scootrs website but i would appreciate some info on the connections.

Many thanks.
by muffster
Wed Jul 11, 2012 4:39 pm
Forum: Lambretta Tech
Topic: S3 ignition switch
Replies: 13
Views: 7934

S3 ignition switch

Hi folks. I want to put an ignition switch in place of the push button cut out on my S3. My question is are they easy to wire in. There are a few on ebay but i don't know which sort to go for or how to connect it in. I've got the original bulb holder and a good quaility handlebar switch which was a ...
by muffster
Sun Apr 29, 2012 6:47 pm
Forum: Lambretta Tech
Topic: Why is my S3 such a nightmare to start?
Replies: 34
Views: 7299

Re: Why is my S3 such a nightmare to start?

Ok so today i took the air hose off and after a few kicks it started. Had to have the throttle screw fully in but of course then the tickover is very high, then i turned the choke back off and it died. Got it started again eventually ticking over fine. I put the air hose back on, still fine. Turn fu...
by muffster
Fri Apr 27, 2012 9:05 pm
Forum: Lambretta Tech
Topic: Why is my S3 such a nightmare to start?
Replies: 34
Views: 7299

Re: Why is my S3 such a nightmare to start?

Ok tried to suss it out again today but me the novice and a seasoned scooterist couldn't get it started, gave up after half an hour. Tried heating the plug up twice, still no joy. I'm sure part of the problem is it's constantly flooding, the plug is aways wet. (22mm jettex) So what causes flooding a...
by muffster
Tue Apr 17, 2012 9:31 pm
Forum: Lambretta Tech
Topic: Why is my S3 such a nightmare to start?
Replies: 34
Views: 7299

Re: Why is my S3 such a nightmare to start?

Roger that!!
Any recommendations. And will i have to change the standard inlet or air hose.

Thanks to all for your input.
by muffster
Tue Apr 17, 2012 8:05 pm
Forum: Lambretta Tech
Topic: Why is my S3 such a nightmare to start?
Replies: 34
Views: 7299

Re: Why is my S3 such a nightmare to start?

I have thought about the fuel issue after reading a few things on here. i have been trying to run as much fuel through it as i can to flush the tank out. It's running though a filter, and having the carb off dozens of times i do get a bit of sediment in the carb bowl but the jets are always clear. S...
by muffster
Mon Apr 16, 2012 6:59 pm
Forum: Lambretta Tech
Topic: Why is my S3 such a nightmare to start?
Replies: 34
Views: 7299

Re: Why is my S3 such a nightmare to start?

Ok, it's got fuel and spark, can't be 100% about the air mixture??? The plug was wet when i took it out. Electronic kit is brand new. Not tried the cylinder head but it hasn't even covered a mile yet! carb is 22mm jetex and i have changed the jets, can't remeber exactly what they are off the top of ...
by muffster
Mon Apr 16, 2012 2:23 pm
Forum: Lambretta Tech
Topic: Why is my S3 such a nightmare to start?
Replies: 34
Views: 7299

Why is my S3 such a nightmare to start?

After it's been left for a few weeks i can't get it to start. It's a resto on an Li. Newly built 175 conversion. ScootRS exhaust, 22mm jetex. air scoop is on. After much fettling it has been running sweet but being in the forces i don't get as much time as i would like to get it sorted. Anyway today...