Scooterotica

Arch_Stanton

Bought a couple only today from Scootopia

http://www.casalambrettauk.com/commerce ... cPath=3218

Arch_Stanton

Cheers for that Rich.

Arch_Stanton

Cheers Rich.

Arch_Stanton

200 Rapido Classic with 42mm clubman, 25mm phbl through the airbox with std SX200 gearing.

Can anyone recomend an initial jetting setup for the carb?

Arch_Stanton

Cheers for the reply, I'll stick with the 3 ring by the sound of it, I know someone building an Indian stg 4 with 30mm dellorto and jl3, sounds like the cut piston will be better suited to this.

Arch_Stanton

Probably been covered before, but I'm building a 200 Rapido Classic and have the choice of Std 3 ring asso piston and a 2 ring asso with the inlet skirt shortened by 3mm. Will be running 42mm clubman, 25mm phbh through the airbox with std SX200 gearing. What benefit or disadvantage does the shortene...

Arch_Stanton

A more observant person would have noticed that when he ordered it from them

Arch_Stanton

Info for thickies needed.

Std 3 ring 66.2 lambretta piston, came with 2 chrome rings and 1 std ring,
in which order should they be fitted

Arch_Stanton

is that the copper coloured ones? squeal like buggery..

Fitted a set of these a couple of years ago, very effective but only had to touch the lever and as mentioned they squealed, is there a cure for this?

Arch_Stanton

I'm looking to buy a standard cast iron 200 cylinder and have noticed some for sale on a certain well known internet auction site. Advertised as Italian made, I was told by the seller they are made by MEC and supplied by VE-UK, has anyone had experience of using these cylinders? Would welcome anyone...

Search found 44 matches

Re: WASHABLE AIRFILTER ELEMENT SER.3 (SIL)

Re: 25mm dellorto

Re: 25mm dellorto

25mm dellorto

Re: Shortened skirt on Asso piston

Shortened skirt on Asso piston

Re: Piston ring order

Piston ring order

Re: Disc pads

MEC Cylinders

Login • Register

Advertising