Scooterotica

Andy W

I have GRP items from Chris at GRP Scooter Products and the fit is excellent, the panels fit better than my metal ones. I have had no trouble with painting them and they weigh a lot less than metal ones.
Andy

Andy W

Hi guys can anyone tell me if I can run without the little emulsion tube fitted above the pilot jet? If so what effect would this have on the pilot jet sizing? Currently fitted 50 pilot, CD1 emulsion tube.
Cheers for any replies Andy

Andy W

Hi all

Does anyone know what size and pitch the thread is on the top of the fork/steering tube? where the top bearing seat and locking ring screw onto?
my forks have a couple of damaged threads and its making it difficult to tighten up the bearing seat and locking ring.

cheers in advance Andy.

Andy W

Hi, I built a friends 175 kitted Li a few years back fitted wit 25 PHBL carb with the following settings;
MJ98, p 51, Atomiser AQ266, Needle D22 2nd clip. this was setup on the dyno with an AF clubman exhaust and no airfilter.
Hope this helps. Andy

Andy W

First scooter - S2 Li150 paid £50 for it and it came in 2 shopping trollies, fitted with a 175 top end, 3omm Mikuni and Fresco exhaust, had to fit a S3 horncasting and mudguard due to no second hand ones around.
First car - Innocenti Mini 998 Cooper red with a white roof

Andy W

Thanks for the replies, I will try a new plug before buying a new speedo. You never it may be the problem and a cheap solution!

Andy W

Pete You will have a yellow wire that comes from the end of the lighting coils to the regulator, if you follow the path of the lighting coils you will see that the last one goes to earth (next to the Pick Up box). De-solder this and solder on another length of wire, feed it through the stator plate ...

Andy W

Pete

Yes you can use your flywheel with a DC stator, if your trying to save money why not convert the AC stator to work as a DC one, save you about £80?

Andy

Andy W

I have an early SIP digital speedo fitted to my GP, it generally worked very well however in the last few weeks it will start off working ok then whilst riding the needle will rise to the 12000 rpm mark and the speedo will read 124MPH for a while before going blank. I do have a resistor plug and cap...

Andy W

Congratulations Dan, all the best in the new job and hope to see you at a rally or race meeting next year.

Search found 144 matches

Re: GRP Panels

VHSH emulsion tube?

Thread size on on forks

Re: Jetting advice

Re: Your First scooter /first car ?

Re: SIP speedo not working!

Re: Electronic flywheels.

Re: Electronic flywheels.

SIP speedo not working!

Re: New Deputy Editor @ Scootering Magazine.....

Login • Register

Advertising