Search found 2588 matches

by corrado
Fri Apr 06, 2018 1:39 am
Forum: Lambretta Tech
Topic: Imola after market inlet manifold
Replies: 11
Views: 4849

Re: Imola after market inlet manifold

psychedelicropcircle wrote: Tue Mar 27, 2018 1:19 pm Is there anything else on the market other than the stock manifold it comes with?
Which version have you got?I can see it being an issue with the inlet manifold where the reed sits into it but earlier ones should be a straight swap with anything that fits a TS1.
by corrado
Fri Mar 30, 2018 1:14 am
Forum: Lambretta Tech
Topic: Casa pull down chain tensioner
Replies: 2
Views: 1956

Re: Casa pull down chain tensioner

Most problems on the GT ones are caused by overtightening the captive bolts, they're only supposed to be torqued to 4 lbs ft.
by corrado
Mon Mar 26, 2018 11:56 am
Forum: General Scooter Chat
Topic: JB Fabrication - contact details?
Replies: 5
Views: 2575

Re: JB Fabrication - contact details?

I've sent Jon a message with a link to this thread.
by corrado
Mon Mar 26, 2018 11:43 am
Forum: Lambretta Tech
Topic: Fork damper washers and disc hub spacers
Replies: 2
Views: 1498

Re: Fork damper washers and disc hub spacers

Most studs are too short for a lot of after market front dampers. I'll measure up the longer ones and I've and you can work out if they're better. I put an 18 or 20mm washer on the stud then fit the damper, then another 18/20 washer, then spring washer, then nylock (or preferably) Binx nut. Not sure...
by corrado
Tue Mar 20, 2018 12:47 am
Forum: Sports Bar
Topic: It's back .... thank f*ck.
Replies: 8
Views: 12482

Re: It's back .... thank f*ck.

Toddy wrote: Sun Mar 18, 2018 9:41 pm Excellent race seems a lot tighter at the top this season
Let's hope it stays that way. 8-)
by corrado
Tue Mar 20, 2018 12:36 am
Forum: Lambretta Tech
Topic: crankshaft thread
Replies: 4
Views: 2617

Re: crankshaft thread

It sounded better than "tw@7". :mrgreen:
by corrado
Mon Mar 19, 2018 4:25 pm
Forum: Lambretta Tech
Topic: crankshaft thread
Replies: 4
Views: 2617

Re: crankshaft thread

Flywheel thread or crankshaft thread?

Not being pedantic as there's 2 threads involved, though suspect you mean for the crankshaft nut and crank.
by corrado
Mon Mar 19, 2018 4:18 pm
Forum: Lambretta Tech
Topic: New Layshafts?
Replies: 26
Views: 9195

Re: New Layshafts?

It's actually cheaper than buying a "safe" hub and an "MB" layshaft. Doesn't include the wheel? And BTW is the wheel interchangeable on the front? No it doesn't include the wheel but the FA Italia wheel is similar cost to a Sip tubeless rim. The wheels come with 4 plastic bungs ...
by corrado
Mon Mar 19, 2018 4:12 pm
Forum: General Scooter Chat
Topic: LCGB - BLOA - Concessionaires......confusion
Replies: 483
Views: 358616

Re: LCGB - BLOA - Concessionaires......confusion

B-Race Tuning wrote: Sun Mar 18, 2018 8:06 pm Would "British Association (of) Lambretta Owners" or "Great British Lambretta Club" or even "Vespa Collective (of) Britain" be allowed? Just asking, like. Simon.
B.O.L.L.O.C.K.S. for short. :lol: