Search found 58 matches
- Sun Nov 07, 2010 12:45 am
- Forum: Show us yer Scoots!!
- Topic: A tootle around the Yorkshire Dales
- Replies: 4
- Views: 2456
Re: A tootle around the Yorkshire Dales
Just joined the forum, and probably the best way of introducing myself is to share a few images of my scoot, taken the other day around the Dales. West Burton http://www.lesmclean.co.uk/Lammy/1DSL8622m.jpg Ribblehead Viaduct http://www.lesmclean.co.uk/Lammy/1DSL8487m.jpg Near Ilkley http://www.lesm...
- Tue Sep 28, 2010 10:05 pm
- Forum: Lambretta Tech
- Topic: Front sprocket options
- Replies: 5
- Views: 1714
Re: Front sprocket options
Right so, correct me if i'm wrong.. 5.22 on a 15 front sprocket, and 4.98 on a 16 Will this make a notible difference,don't get me wrong i'm not after getting an extra 2 mile an hour, just want the best for the engine gearbox.. is a scootrs exhaust basically a pm copy.. ? yeah i ran my muggy 186 wi...
- Mon Sep 27, 2010 7:18 pm
- Forum: Lambretta Tech
- Topic: Timing problems
- Replies: 12
- Views: 3809
Re: Timing problems
I have fixed the problew of the points now I have a new problem. If I turn the stator as far as I can to the left it shows about 30º and if I turn it as far as I can to the right it shows about 25º but the firing point should be at 19º so no mater what i do it is out. Any help please as I´m bec...
- Mon Sep 27, 2010 7:15 pm
- Forum: Lambretta Tech
- Topic: Timing problems
- Replies: 12
- Views: 3809
Re: Timing problems
I have fixed the problew of the points now I have a new problem. If I turn the stator as far as I can to the left it shows about 30º and if I turn it as far as I can to the right it shows about 25º but the firing point should be at 19º so no mater what i do it is out. Any help please as I´m bec...
- Sat Sep 25, 2010 10:11 pm
- Forum: Lambretta Tech
- Topic: powder coat
- Replies: 3
- Views: 1887
Re: powder coat
My latest project has a powder coated frame. Unfortunately whoever had it done didn't bother to knock out the dents in the frame loop. I don't want to remove the powder coat, so is it possible to fill out the dents (with isopon) and then spray paint over the loop? yeah ive had a few like that, depe...
- Wed Sep 22, 2010 9:59 pm
- Forum: Lambretta Tech
- Topic: mugello 230
- Replies: 17
- Views: 5048
Re: mugello 230
here is the fuel/air graph to go with the dyno- run http://i1045.photobucket.com/albums/b458/paulionuno/paulfuel.jpg You are running lean. yeah, the guy who dyno'd it did show me how the graph showed it to be on the lean side but it was evenin time and i didnt have any more needles for the oko carb...
- Wed Sep 22, 2010 9:29 pm
- Forum: Lambretta Tech
- Topic: mugello 230
- Replies: 17
- Views: 5048
Re: mugello 230
Hi Wayne Think there is a problem with your dyno results on the RPM signal i'll try to explain. The dyno only measure the torque produced at the rear wheel and then calculates the BHP based on the RPM signal and the rotational axis of the drum ( which is a fixed number of 5252 calculated using rota...
- Tue Sep 21, 2010 8:23 am
- Forum: Lambretta Tech
- Topic: TV 205 BARREL WITH BOOST PORT
- Replies: 13
- Views: 4276
Re: TV 205 BARREL WITH BOOST PORT
well after havin a chat with mr broady about the pros and cons of that barrel, im havin a think on wots next, either tweek my muggy 225 to make it more realistic or maybe i sell muggy and by rt220??? not sure just yet, prob spend 300 quid making the muggy perform somewhere near rt220 spec but then ...
- Tue Sep 21, 2010 7:57 am
- Forum: Lambretta Tech
- Topic: The Idle Rich?
- Replies: 5
- Views: 2010
Re: The Idle Rich?
To clarify.....I use a45 jet with good results on a SIL 200 with 42mm clubman. Only TV/sx200 used 48 jets and Li125 42 idle all the rest used 45 idle why not try and see :?: :?: .adjust idle mix by using the mixture screw (out to weaken, in to richen) lammy 20mm carb mixture screw is out to richen/...
- Mon Sep 20, 2010 11:15 pm
- Forum: Lambretta Tech
- Topic: mugello 230
- Replies: 17
- Views: 5048
mugello 230
muggy 225 with 60mm crank and standard rod, 30mm oko carb and sterling pipe sx200 gears with 15/47 http://i1045.photobucket.com/albums/b458/paulionuno/paultorque.jpg http://i1045.photobucket.com/albums/b458/paulionuno/paul.jpg just under 16bhp @ 7000rpm and similar torque. not great i would say for ...