Scooterotica

Magalluf

I have exactly the same problem as you and thanks to the foto I think it must be the crownwheel. I have the same crownwheel (I think ) which is a MBD and the only solution that I can think of is to drop the front sprocket 1 tooth.

cheers

Steve

Magalluf

I've seen a few Lambrettas recently with twist and go front wheels and disk brakes. What bike are they off and do they need a lot of work to make them fit.

Cheers

Steve

Magalluf

I have found that on ! stator the Green to White wires reads 305 ohms does that mean I need to change the LT coil.

Magalluf

Can anyone tell me how to test the pick up on a stator, I have 4 stators and none of the buggers work. Before I go out and buy more pick ups and set about soldering I would like to check to see if that is the problema. No point trying to fix something that aint broke

cheers

Steveo

Magalluf

I went to the Garage today and 1 of the good magnets just popped out. The other didnt want to know so I heated it and that also popped out. Which now makes me think that the poor quality glue could be causing the problem, by welding the center boss ir could be melting the glue holding the magnets in...

Magalluf

http://i1229.photobucket.com/albums/ee474/crunchy373/DSC_0054_zps34bf10fc.jpg I´ve had it sitting on a shelve for over a year with a broken magnet. I managed to get the plastic bit out with the magnets intact you can see the broken one in the foto. The broken one was the only one with glue on it. A...

Magalluf

I wonder if there is a diference between 150 and 200 casings

Magalluf

I was just about to ask the same question, I have Linx dog leg levers on my Jet and I love them and want to put Dog legs on all my bikes problema is the Linx/Lince ones are imposible to get hold of. I was wondering if these would fit http://www.ebay.co.uk/itm/VESPA-ALLOY-BLACK-DOG-LEG-BRAKE-CLUTCH-L...

Magalluf

Against is that the big end touches the engine block so you need to get it machined also you need to have the mouth of the block touched up in places where the rod touches.

Magalluf

Hopefully after shortening the piston skirt there wont be a next time. It´s easier and safer with a 58mm

cheers

Steve

Search found 60 matches

Re: Chains

twist and go front wheel

Re: Pick up

Pick up

Re: Is it posible to fix a Varitronic

Is it posible to fix a Varitronic

Re: 58mm or 60mm Crank Pro's and Cons?

Re: Dog leg levers for series 2

Re: 58mm or 60mm Crank Pro's and Cons?

Re: Piston bottoming out

Login • Register

Advertising