Search found 36 matches
- Thu Jan 21, 2010 7:44 pm
- Forum: Carburettor Set-ups
- Topic: Idle jet emulsion tube ?
- Replies: 2
- Views: 1498
Idle jet emulsion tube ?
Got a 30mm VHSH and read some were some people take these out of the carb so it improves the fuel flow ,my ? is does it ,,,,,any one tried this ?
- Mon Nov 30, 2009 7:26 pm
- Forum: Carburettor Set-ups
- Topic: Delly VHSH SET UP
- Replies: 3
- Views: 2932
- Wed Nov 11, 2009 7:02 pm
- Forum: Carburettor Set-ups
- Topic: Delly VHSH SET UP
- Replies: 3
- Views: 2932
Delly VHSH SET UP
Been try a vhsh 30mm carb on me scoot , could not find any links to any set up for a 175cc and noticed a few other peeps been having probs with set up info , so i thought these links i found may be of help ,,, even if some are for go carts carb setting up is the same principle :roll: http://www.con...
- Fri Nov 06, 2009 11:59 am
- Forum: Lambretta Tech
- Topic: Carburettor - Float Needle Valve ,, what size
- Replies: 3
- Views: 1430
Re: Carburettor - Float Needle Valve ,, what size
Hello agian ,, tried the 264 sean ,,,man it made the spluttering worse , mid throttle was like a machine gun ,,lol will try a 262
- Wed Nov 04, 2009 6:16 pm
- Forum: Lambretta Tech
- Topic: Carburettor - Float Needle Valve ,, what size
- Replies: 3
- Views: 1430
- Wed Nov 04, 2009 5:50 pm
- Forum: Lambretta Tech
- Topic: Carburettor - Float Needle Valve ,, what size
- Replies: 3
- Views: 1430
Carburettor - Float Needle Valve ,, what size
Need a bit of help ,, built a 175 engine,lammy, 30 mm delly ,scootrs pipe, got ma jetting just about right , but wondered what Float Needle Valve size to use its got a 225 in it at mo , but when i get to between 1/2 and 3/4 throttle is splutters a bit , any ideas,,,?? jets are as follows 120 main x...